i36 ignite module case

I created a case to hold an i36 ignite module. It has several options for lids including a windowed option using translucent filament or a simpler lid with more of a bullseye design, both allow visibility of the module light and pass through of cables on both sides. There is a button on the side of the case allowing you to turn on and off the module without taking it out of the case. The button is set up to print it in a different color, but can be done in the same color like the pictures. I adjusted the purging volume for the button color to decrease waste and ended up with a darker red button when I tested it. The button might need to be broken free initially and then worked a little to make sure it freely moves. Supports should be enabled as it is a floating object. I've printed this in both pla and petg and they both came out great. 

I also created a storage lid for those who want to use the case as a storage option and there is space below the module to store the antenna, charging cable, and backup 9 volt battery cable. I threw in an extra storage lid with a little design on it for fun. Text could be added using bambu studio for those who want to customize it. The case is made to allow for the lids to be stored on either side, so when a lid is not in use, it can be stored on the bottom.

There is now an option for the case without the storage underneath.