Simple Easter Chick
Print Profile(2)
Description
This is a simple Easter Egg chick. Only 22g of PLA!
The chick is printed in parts, each in a solid colour. It can be printed without an AMS. No print supports are used either.
Assembly is straight forward. The parts press together following the photos. Apply a little CA glue to make joins permanent. The central pin that holds the feet and body together is tapered - the wider end (that was on the build plate) goes to the feet. Some parts can be oriented in two different ways - I recommend making the surface from the build plate the most visible. Refer to the photos for help with assembly.
I printed a couple of these chicks to include as toys in my 3D printed Easter egg gifts.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)