Round Dragon

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 199.7x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.8mm

Filaments Used:
    #000000 PLA Bambu Basic Black  Transmission Distance: 0.1
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 2.6
    #3b3b3b PLA Bambu Basic Dark Gray  Transmission Distance: 0.2
    #ddd7c7 PLA+ Esun Bone White  Transmission Distance: 4.9
    #ffffff PLA Bambu Basic Jade White  Transmission Distance: 6.3
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #14 (0.68mm) swap to Blue Gray
    At layer #19 (0.88mm) swap to Dark Gray
    At layer #20 (0.92mm) swap to Bone White
    At layer #29 (1.28mm) swap to Jade White for the rest.