Samsung Galaxy S25 Organic case v1.9 - Smartphone

This is my second Samsung Galaxy S25 case - Organic - version 1.9

No support is required in the slicer settings :-)

The yellow parts in the second picture are the supports for easy printing and must be removed after. Removing can be easy or sometimes a little difficult depending on the material and printer.

Version v1.9 (1,6 mm thickness) changes:
Camera cutout and Microphone holes optimized.
The Organic pattern is now better fixed around the camera and the light (flash).
Maybe it needs still small improvements - please give me feedback.
 

I use filament TPU shore 95A and slicer temperatures -> nozzle: 220 °C, bed: 50 °C. For a good TPU print the filament should be dry.

See also Voronoi - version 1.3 --> https://makerworld.com/de/models/1128793
and Hexagon - version 2.1 --> https://makerworld.com/de/models/1515741

Happy Printing
Toni :-)
 

----------------------------------------------------------------------------------------------------------------
 

This is my first Samsung Galaxy S25 case - Organic - Version 1.9

no support is required in the slicer settings :-)

The yellow parts in the second picture only serve as supports for easy printing and must be removed afterwards. Removal can be easy or sometimes a little difficult depending on the material and printer
 

Version v1.9 (1.6 mm thick) changes:
Camera cutout and microphone holes optimized.
The Voronoi pattern is now better fixed around the camera and the light (flash).
Maybe it still needs small improvements – please give me feedback.
 

I used filament TPU hardness 95A and slicer temperatures -> nozzle: 220 °C, bed: 50 °C. For a good TPU print the filament should be dry.

See also Voronoi Version 1.3 --> https://makerworld.com/de/models/1128793
and Hexagon - version 2.1 --> https://makerworld.com/de/models/1515741
 

I would always be happy about a „Download”, „Like”, „Make”, or a „⭐⭐⭐⭐⭐” rating!

Happy Printing
Toni :-)