Samsung Galaxy S25 Voronoi Case v1.3 - Smartphone

This is my first Samsung Galaxy S25 case - Voronoi - version 1.3 (now repaired and optimized)

No support is required in the slicer settings :-)

The yellow parts in the second picture are the supports for easy printing and must be removed after. Removing can be easy or sometimes a little difficult depending on the material and printer.

Version v1.3 (1,6 mm thickness) changes:
Camera cutout and Microphone holes optimized.
The previous version had small open structures and is now repaired.
The Voronoi pattern is now better fixed around the camera and the light (flash).
Maybe it needs still improvements - please give me feedback.
 

I use filament TPU shore 95A and slicer temperatures -> nozzle: 220 °C, bed: 50 °C. For a good TPU print the filament should be dry.

See also Organic - version 1.9 --> https://makerworld.com/de/models/1207211
and Hexagon - version 2.1 --> https://makerworld.com/de/models/1515741

Happy Printing
Toni :-)

----------------------------------------------------------------------------------------------------------------

This is my first Samsung Galaxy S25 case - Voronoi - version 1.3 (now repaired and optimized)

No support is required in the slicer settings :-)

The yellow parts in the second picture are merely supports for easy printing and must be removed afterwards. Removing can be easy or sometimes a little difficult depending on the material and printer.
 

Version v1.3 (1.6 mm thickness) changes:
Camera cutout and microphone holes optimized.
The previous version had small open structures and is now repaired.
The Voronoi pattern is now better fixed around the camera and the light (flash).
Maybe it still needs improvements – please give me feedback.
 

I used filament TPU shore 95A and slicer temperatures -> nozzle: 220 °C, bed: 50 °C. For a good TPU print the filament should be dry.

See also Organic Version 1.9 --> https://makerworld.com/de/models/1207211
and Hexagon - Version 2.1 --> https://makerworld.com/de/models/1515741
 

I would always be happy about a „Download”, „Like”, „Make”, or a „⭐⭐⭐⭐⭐” rating!

Happy Printing
Toni :-)