Ryan1234

cover

2023-12-28_mayu3t4vb3em.jpg

2023-12-28_4a33ocrupzky.jpg

plate_1.png

RadDadRob

IMG_1061.png

IMG_1062.png

IMG_1058.png

IMG_1059.png

IMG_1060.png

2024-08-28_6853543729fe9

0.2mm layer, 6 walls, 25% infill, 100% Scale&nbsp;Pretty basic. I would like for it to be slightly thicker, but the rib going across the middle definitely adds some strength in the most likely direction to break.&nbsp;&nbsp;For reference, this is a 10m speaker wire dipole antenna, about 16 feet or so of 16AWG wire. The only things that haven't fit (out of pure laziness) are the tie-up ropes. I bet they would though!

0.2mm layer, 6 walls, 25% infill, 100% Scale

IMG_4464.jpeg

IMG_4465.jpeg

IMG_4462.jpeg

Same as the original print profile, but doubled for strength. Once removed, fold print and glue halves together. Parts are connected by a 1-layer connector to help with alignment. &nbsp;Best to let it cool completely before removing from the bed, or be very careful in removing. You&#39;ll still need to do a slight adjustment to alignment once folded to make sure the holes line up.

Doubled for Strength

IMG_4475.jpeg

85% for A1M - 0.2mm layer, 6 walls, 25% infill

plate_2.png

IMG_4476.jpeg

Resized to 85% to print on A1Mini. Also included is a mirrored part for gluing together to improve strength

85% for A1M - Doubled for Strength

Wire Winder for antenna wire, string, etc. Built for a DIY dipole project.

Wire Winder

ASIA

Print Profile(4)

Description

Comment & Rating (68)

License

Related Models