Foldable multicolored modular Hexagonal shelf

Hey, that looks cool!

Looks good !

I hope I understood the question correctly. The 90° angle is determined by the shape of the model. The one with the movable platform also remains quite stable when loaded (approx. 1-1.5 kg)

I appreciate the quick reply...in the photo it looks like the fold down portion is supported by a 90° bracket of some kind. Is this just an illusion?

@suny66, I think he’s asking about the bracket I’m pointing to in the edited image. I’d also like to know as it give a little extra decorative flare to the shelf.

I made various small changes, especially when printing the model, including reducing the speed to improve the print quality. With the first prints, the small tabs always broke or weren't printed correctly at all. Later, I could close the flap maybe 5-10 times, but then the small tabs broke. My tip: After printing, before you close the flap for the first time, put a drop of Loctite 401 on each tab, then wait at least 1 hour until the Loctite has completely dried. The tabs should now hold better. Close the flap only now! Please do not glue the parts together! ;-) My third print attempt has now lasted about 18 months and is still being folded and unfolded from time to time for demonstration purposes and it's still holding up

Oh, I believe you tried printing the parts individually. This is an in-place print where everything is printed in "one piece". There's a small gap between the individual parts so they don't stick together and the joint remains movable. If you're using Bambu Studio, simply adopt all the settings and print the model as preset

Yes, I printed them separately to have a two-tone result

Thanks for your good idea. I will try to implement it