So I somehow managed to pick the wrong filament so printed 4 in silver PLA silk :D They worked, but were softer than standard PLA (PETG may have been a better choice) so were sacrificed in the cause of getting these hooks onto the Xreals. A tiny sacrifice for the greater good, and this was absolutely the only way I was getting these hooks on to the arms!

Printed a couple of these as well as the handle versions. Just so handy :)

Lovely design, I printed one for my wife in a purple filament and added a keychain, then a couple of her friends eyed it up so I had to print hers twice more :D

These are perfect, I needed some Octopus arms for my shed aka maker space, as it has a bit of a Steampunk theme going on. Added them to brackets printed to support the Sunlu S4.

This has finally saved most of my longer prints on the P1S from warping, I was losing hope and blaming it on operator error. Even setting the AUX fan to off, well that thing seems to have a mind of its own at times so it would come on and ramp up, ruining the print. This has mitigated that. Thank you!

Printed really nicely, especially as I've had some cooling issues with the P1S (fixed by printing an aux fan shield) and this was the first fairly flat print to test. Did the top in a contrasting colour, really preem print.

I struggled a little with the support removal under the lid, though one did remove quite easily so I think that is tolerances on the printer plus waiting for it to cool more. Fun print, printed two for a camping trip :)