RC wheel loaderI wanted to build a functional scale model of a large vehicle, with plenty of features but still feasible to make using Cyberbrick components. That’s why I decided to recreate a wheel loader.Scale 1:25My design was inspired by the Volvo L350F wheel loader. While it was challenging to capture all the details of the real machine and still keep it fully functional, I did my best to achieve both. Working ‘hydraulic’ CylindersOne of the most challenging parts of this design was the cylinders. I ultimately created a solution using threaded N20 motors (available from Maker’s Supply). By combining an M3 nut with the motor’s rotating shaft, the mechanism pushes a rod up or down.These cylinders make it possible to achieve realistic bucket movement.Other features4 Wheel driveFront and rear differentialRealistic Articulated Steering using a servoReleasing soon on makerworld!I’m still working on the assembly guide and fine tuning some allowances, but once that’s finished I hope to release it next week. If you have any questions or suggestions, please let me know, I’m curious to hear what you think.