Handheld dispenser gun for 50 mm packaging tape (up to 120 mm diameter) or any other tape under that range.

You will just need a wood screw (WS) 3,5 x 25 mm for the movable lid and 2 short wood screws 3,5 x 10 mm for the blade (better if you cut these two screws shorter to 7 or 8 mm).

Model TD1 is prepared to fit a steel blade-saw like this one: https://www.amazon.es/gp/product/B0CD8YWD2Q/ref=ox_sc_saved_image_1?smid=AHP4NSCWH5R9U&psc=1

or https://www.amazon.com/Replaceable-Blades-IDHM-Packing-Dispensers/dp/B0CDC1J6YY/

With version TD1 you will have to screw directly into the plastic, as the holes might have different spacing depending on your blade.

Model TD2 works with a printed blade made of PLA. Print this part in 0.12mm layer height. (PLA blade can be glued or screwed)

Tape dispenser body is ready to be printed together with the rod (you’ll have to remove the support between the body and the rod, but it’s quite easy)

Printing settings:

• 0.2mm layer height
• Support: tree slim/threshold angle 20 (but with Normal Snug works too)
• 15 % density infill
• 6 top shell layers

If you want to support this project, you can donate here: https://ko-fi.com/casaprint3d

Remember that this design is for private use only, please contact me if you have questions.

Happy printing!