I made the next small piece of my collection, of course there are versions in multi colors! :).
The build plate guide helps you easily push the build plate to its exact location. An important aspect of the design was that it fit well, could be easily placed without much force, of course it should be easy to print and look good. Installation video in the description.
I do not recommend mirroring the part and moving it to the right side! According to my practical experience, it is enough to place it only on one side, it does its job well and the right purge strip is far away. Please do not upload such models, I deliberately did not post the version on the right.
I hope you like it too!
Feel free to ask if you have any questions or comments!
If you like this 3D model and are able to, please consider supporting my work by > buying me a coffee < your contribution will go a long way towards making future creations! Thank you for being a supporter!
Installation is very easy, even with one hand.
Quality:
Layer height: 0.2
Wall Generator: Arachne
Strength:
Wall: 2
Filling density: 30 %
Filling pattern: Adaptive cube
Support:
Enable Support: YES
Style: Tight
Remove small overhangs: NO
Z distance: 0.15
Support/Object XY distance: 0.35
Do not use PLA material for printing if you use your printer with other high temp. materials. PETG, ABS, ASA materials are printed at a higher temperature, which PLA cannot withstand. I recommend using ABS, ASA or PETG material.
I would like to recommend the following models to your attention (link, click on the photos):