Made to be a less expensive alternative for Stealth Press, with the added benefit of not shooting your soldering iron across the room, this is, definitely, not a Key-Bak®, but it sure works like one.
Stealth Press is a highly precise, mostly printed DIY heat set insert tool for generic, TS100/101, and Pinecil soldering irons.
Download Stealth Press printend parts, see BOM and sourcing guide here.
Mechanical parts | QTY |
---|---|
M3x8 SHCS — Bolts || Source: [Link] | 2 |
M3 — Threaded Inserts — M3x5x4 (M3 x OD:5 x L:4) || Source: [Link] | 2 |
Not a Key-Bak® || Source: [Link 1 - select 500g version] or [Link 2] | 1 |
Printed Parts | |
---|---|
Printed parts | 2 |
PRINT GUIDELINES |
Here are print guidelines for you to follow in order to have decent success with printing parts:
3D PRINTING PROCESS | FDM (fused deposition modeling) |
INFILL TYPE | Grid, Gyroid, Honeycomb, Triangle or Cubic |
MATERIAL | ASA, ASA-CF, ABS, ABS+, ABS-CF |
INFILL PERCENTAGE | 40% - 60% |
LAYER HEIGHT | Recommended: 0.2mm |
WALL COUNT | Recommended: 4 |
SOLID TOP/BOTTOM LAYERS | Recommended: 5 |
EXTRUSION WIDTH | Forced 0.4mm |
You can succeed with Support cubic infill type (slicer support may vary) and as little as 25% infill for all parts if are aiming for faster print speeds and less filament usage.
PLA, PLA+, and PETG are also considerable filament choices.
A wall count of 4 is an absolute must to ensure the structural integrity of the parts. There is no need to go over the top with this. 4 walls are OK for this particular build.
HOW TO SUPPORT THE PROJECT |
CHANGELOG |
Date | Change |
24.02.2024 | Initial version |