RB Creations

Iacopo

Compact handle + spool holder solution for the Bambu Lab A1 mini that does not protrude beyond the printer making it more compact overall. The clips are necessary to avoid tangling the cables with the handle. It is important to consider the strength of the printed parts as, if printed with incorrect settings, they could break and damage the printer. Version 2 is stronger, easier to assemble and know made out of Bambu Lab PLA matte which should be stronger and cheaper.&nbsp;IMPORTANTClearance needed between tight mechanical parts (like the screws used) varies from printer to printer and is impacted by filament, print settings and environmental variables. You may need to adjust the x;y dimensions of the screws in order to make one that fits. I&#39;m new to 3d printing, so if someone knows of a better solution for this problem, any advice would be more than welcomed!

A1 Mini Minimal Handle And Spool Holder V2

A1 Mini

Wing-Art

Kitchen Dispenser V2 - now with Quicklock Mount!&nbsp;In <a target="_blank" href="https://makerworld.com/en/models/94119#profileId-100760" rel="nofollow noopener">Version 1</a> of the Kitchen Dispenser, the problem was the wall mount. It was too unstable for heavier and larger glasses. Therefore, in response to numerous requests, the wall mount has been improved. We now have a Quickmount with a lock that operates using a pressable spring mechanism to ensure the kitchen dispenser holds securely.&nbsp;This print file contains the design for a universally applicable kitchen dispenser, specifically developed for use with pickle jars with a diameter of 80 mm or Mason Jars.&nbsp;Compatible Jars for self-printing are <a target="_blank" href="https://makerworld.com/en/models/96064#profileId-102443" rel="nofollow noopener">AVAILABLE HERE </a>for the Standard (Pickle-Jar) Version! The Mason Jar Version is a bonus for your own Mason Jar. There is also an adapter for the standard version (pickle jar) to a wide mouth Mason jar (with 86mm) available in the print profiles! Excellent for storing and easily dispensing various ingredients such as:  <ul><li>Coffee</li><li>Cereal</li><li>Rice</li><li>Cat food</li><li>Pasta</li><li>Lentis</li></ul>…or many other things! Design Features:<ul><li>Flap with Rubber Ring: At the bottom of the dispenser, there is a flap operated by a cleverly integrated rubber ring mechanism.</li><li>Versatile Use: The dispenser is ideal for a variety of dry foods such as coffee beans, cereal, rice, pasta, lentis and other dry ingredients.</li><li>Text Plates: Additionally, the kitchen dispenser can be equipped with text plates for labeling.</li></ul>&nbsp;Note - There are two Versions of the Dispenser:   <ul><li>Standard (Pickle) Version for 80mm Diameter Jars</li><li>Mason Jar Version (als requested in the comments)  </li></ul>If you are printing the Standard (Pickle-Jar) Version , then <a target="_blank" href="https://makerworld.com/en/models/96064#profileId-102443" rel="nofollow noopener">these jars AVAILABLE HERE </a>from me, will fit perfectly!&nbsp;It is highly recommended to print the included test thread if you are printing the Mason Jar Version or if you are unsure. This is to ensure that the thread fits correctly and your jar is compatible with the dispenser.&nbsp;<a target="_blank" href="https://all3dp.com/2/food-safe-filament-brands-compared/" rel="nofollow noopener">HERE</a> you can find the Best Food-Safe PLA Filaments of 2023. Special bonuses:&nbsp;Additional doors:<ul><li>10mm handle (Standard size)</li><li>20mm handle</li><li>30mm handle</li></ul>Adapter:<ul><li>Standard (Pickle-Jar) Version to → Wide Mouth Mason Jar (86mm)</li></ul>Funnel by CD84:<ul><li><a target="_blank" href="https://makerworld.com/en/@CD84" rel="nofollow noopener">CD84</a> provides us with a specially designed funnel for filling the Kitchen Dispenser <a target="_blank" href="https://makerworld.com/en/models/422982#profileId-326091" rel="nofollow noopener">available HERE</a>. Thank you CD84!  </li></ul><figure class="image"><a href="https://makerworld.com/en/models/422982#profileId-326091" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/845762/2024-04-11_77f130538e75a.png"></a></figure>Just take a look at my other Kitchen Tools here:<ul><li><a target="_blank" href="https://makerworld.com/de/models/96064#profileId-102436" rel="nofollow noopener">Printable Jars (compatible with this Kitchen Dispenser!)</a></li><li><a target="_blank" href="https://makerworld.com/de/models/96912#profileId-103376" rel="nofollow noopener">Orange Peeler Citrus Pro</a></li><li><a target="_blank" href="https://makerworld.com/de/models/99747#profileId-106354" rel="nofollow noopener">EGG-citing Nest - the classic Egg Cup</a></li><li><a target="_blank" href="https://makerworld.com/de/models/115132#profileId-123776" rel="nofollow noopener">Bottle-Can Dispenser</a></li><li><a target="_blank" href="https://makerworld.com/de/models/100260#profileId-106926" rel="nofollow noopener">Knife Cat Napkin Holder</a></li><li><a target="_blank" href="https://makerworld.com/de/models/109348#profileId-116818" rel="nofollow noopener">Hexagon Napkin Holder</a></li></ul>&nbsp;

Kitchen Dispenser V2 with Quicklock Mount!

Kitchen

squinn

A sturdy soap box which makes use of a fun curvy shape to create raised interior rails for the soap to sit on for quicker drying, and includes a strong built-in latch to help secure the case closed when you're ready to travel. Three sizes are provided to accommodate bars of soap that are up to 28 mm thick (small), 34 mm thick (medium), or 40 mm thick (large). All sizes will allow for a bar of soap that is up to 100 mm long and 65 mm wide.&nbsp;This is a fully print-in-place design, and no supports are needed. I had no trouble printing this using default settings using the regular flat print sheet, but note that this model requires decent bed adhesion to prevent the curvy shapes from coming loose during the first few layers of the print (and, so, textured sheets may be problematic). Also note that the small version will even fit on a smaller print bed (such as the A1 Mini) if you rotate it by 40 degrees. Happy travels!

Sturdy Curvy Soap Box

Random

Henlor

Customise your slicer with bed plate models and bed textures.&nbsp;<h3>How to change the bed shape model</h3><a target="_blank" href="https://help.prusa3d.com/article/custom-bed-models_158431#polygon-count" rel="nofollow noopener">PrusaSlicer / SuperSlicer</a><a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/3rd-party-printer-profile#custom-printer-settings" rel="nofollow noopener">Bambulab Studio / OrcaSlicer / GalaxySlicer</a><a target="_blank" href="https://forum.simplify3d.com/viewtopic.php?t=2356" rel="nofollow noopener">Simplify3D</a>&nbsp; More bed shapes models and bed textures <a target="_blank" href="https://makerworld.com/en/models/171951" rel="nofollow noopener">here</a>. <a target="_blank" href="https://makerworld.com/en/models/171951" rel="nofollow noopener"><img src="https://media.printables.com/media/prints/702227/rich_content/71b93d6c-38ad-4d33-9c5c-147f99311dff/k1-slicer-bed-cover2x.webp#%7B%22uuid%22%3A%22329f7c36-c331-4395-9694-e38a27c5e3b0%22%2C%22w%22%3A1920%2C%22h%22%3A1081%7D"></a><h4> </h4><h3><a target="_blank" href="https://makerworld.com/en/models/171976#change_log" rel="nofollow noopener">Change Log</a></h3>2 January 2024 First release Added Simplify3D Bed Shape Model. Made by Nastra.&nbsp;<h3><a target="_blank" href="https://ko-fi.com/henlor" rel="nofollow noopener">Want to support my work ?</a></h3>Enjoy this model? Your support means the world to me! If you love what I do, remember to like and rate the model. You can also follow me to get the latest updates. If you wish to further help me to fuel future projects, consider <a target="_blank" href="https://ko-fi.com/henlor" rel="nofollow noopener">buying me a coffee</a>, I'm literally running on those! Every cup counts and is immensely valued.&nbsp;&nbsp;

Creality K1 Slicer Bed Shape Model

K1 Creality

DPJRodrigues

Introducing the Magic Finger Guillotine Trick - a sleek and simple 3D-printable design that replicates the classic finger guillotine illusion. These files allows you to easily print and assemble your own finger guillotine, ready to amaze audiences with its captivating illusion. Download now and add a touch of mystery to your magic repertoire.&nbsp;Tolerances are very important for a sleek assembly. I didn&#39;t use any glue since it was all snap on.&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/PTIPii9JvtE"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/PTIPii9JvtE" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Assembly instructions:<figure class="media"><div data-oembed-url="https://youtu.be/--fE99wdV3M"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/--fE99wdV3M" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;╭─━━━━━━━━━━━━━━━━━━━━─╮ Buy me a ☕️ or a 🍺 <a target="_blank" href="https://www.buymeacoffee.com/dpjrodrigues" rel="nofollow noopener">https://www.buymeacoffee.com/dpjrodrigues</a> ╰─━━━━━━━━━━━━━━━━━━━━─╯Checkout as well some of my other designs<figure class="image image_resized" style="width:70%;"><a href="https://makerworld.com/@dpjrodrigues/collections/1121520" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000230117/design/2024-04-23_aefa99af589f2.png"></a><figcaption><a target="_blank" href="https://makerworld.com/@dpjrodrigues/collections/1121520" rel="nofollow noopener">https://makerworld.com/@dpjrodrigues/collections/1121520</a></figcaption></figure><figure class="image image_resized" style="width:70%;"><a href="https://makerworld.com/en/models/204911" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000230117/design/2024-03-08_61dc2e040488e.gif"></a><figcaption><a target="_blank" href="https://makerworld.com/en/models/204911" rel="nofollow noopener">https://makerworld.com/en/models/204911</a></figcaption></figure>

Magic finger guillotine

Magic

calebgomer

All the fun of a suspended object, with the clear suspended filament being a fiber optic, lighting up itself and the center ring!&nbsp;To print, the “Fiber” and “Rings” objects should both use the same material. However, two separate filament entries should be used in your slicer, like this:<img src="https://makerworld.bblmw.com/makerworld/draft/496349/2024-02-04_bf66f5d9dab4b.png"><img src="https://makerworld.bblmw.com/makerworld/draft/496349/2024-02-04_6bab5dfd9bfbe.png">When printing, if using an AMS, select the same filament for both:<figure class="image image_resized" style="width:49.56%;"><img src="https://makerworld.bblmw.com/makerworld/draft/496349/2024-02-04_eea6ae40c7aeb.png"></figure>This ensures the slicer properly handles the fiber strands. if this step is skipped, the strands may not properly attach at the center: <img src="https://makerworld.bblmw.com/makerworld/draft/496349/2024-02-04_390588a84b95f.png"><img src="https://makerworld.bblmw.com/makerworld/draft/496349/2024-02-04_84a3b387ef31a.png">&nbsp;<figure class="image image_resized image-style-side" style="width:27.42%;"><img src="https://makerworld.bblmw.com/makerworld/draft/496349/2024-02-04_464224fb02d08.jpg"></figure>Once printed, insert an LED light strip through the hole in the bottom, and loop it around the outside of the ring once or twice, facing the center. Tape or glue the lose end of the light strip so it doesn't come off.&nbsp;

Suspended Iris - Fiber Optic Lamp

sdemirel

Pets are cute but sometimes nasty . Especially when your neighbours pet has a tendency to enter your house without your knowledge&nbsp;This mat prevent the cats or dogs to enter from door opening secretly&nbsp;it also stops the mice to enter house from open doorway&nbsp;it is printed as 2 parts perfectly aligned together.&nbsp;You can use it combined as a wide mat or seperarate for a narrow mat&nbsp;There is also connectors on both ends

Cat (or dog) repellent Mat

Cats

waltersworld3d

<a target="_blank" href="https://www.patreon.com/waltersworld" rel="nofollow noopener">https://www.patreon.com/waltersworld</a>&nbsp;Be sure to check out our Patreon for all newly released models, monthly giveaways, and the opportunity to have models designed custom for you&nbsp;Guns have been updated since original model was created. Fairly simple print. Don&#39;t mess with his dog. Don&#39;t mess with his car. Pencil not included.

Bricks John Wick

Lego 

Stefan_schmid91

Nice Print of Yoshi.AMS with Generic PLA from 3DJake -Green, White, Blue, BlackStart with blackat Layer #8 change to Blueat Layer #13 change to Greenat Layer #19 change to White&nbsp;

Super Mario - Yoshi

Mario Room

trevorferguson6907

Challenge Coin Display Rack. Holds coins up to .200" thick. Holds approximately 4 coins per row with an average diameter of 2". Has 9 Rows.

Challenge Coin Display

Friends

michelem

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139309/design/2024-04-23_b4afa61493a71.png"></figure>A VERSATILE EVERYDAY COMPANION&nbsp;Imagine having a versatile tool that effortlessly fits into your pocket, ready to tackle an array of tasks.&nbsp;Meet the SmartBits – a compact marvel that seamlessly combines multiple functions in a sleek design.&nbsp;This tool serves as both a screwdriver and a bit holder, providing easy access to 8 different bits for various applications.&nbsp;Activating the tool is a breeze – a simple slide on the exposed bar causes the bits to extend from the opposite end. The magnet effortlessly guides them back into position. Never forget it open.&nbsp;Thanks to the additional embedded magnets, each bit is securely held in place, ensuring they remain steadfast whether you&#39;re on the move or storing the SmartBits in your pocket.&nbsp;It&#39;s the ideal companion for your everyday needs, effortlessly blending convenience and functionality.&nbsp;Print Instructions:&nbsp;Support is required for both the Base and the Slider. Please verify the 3mf file with Bambu Studio if there&#39;s any uncertainty.&nbsp;Place the Slider with the magnet holes on the build plate and add regular support.&nbsp;Position the Base with the side opening on the build plate and add regular support.&nbsp;There is an alternative version of the base with flat bottom you can print with it on the build plate, but it requires support too.&nbsp;No support is needed for the Button and Lid.&nbsp;I recommend printing everything with a minimum resolution of 0.16mm.&nbsp;Bill of Materials (BOM):&nbsp;You&#39;ll need some magnets and a few screws:<ul><li>12 magnets, 5 or 6mm x 2mm</li><li>4 screws, M3 Socket Head, 8mm</li></ul>Assembly Instructions:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139309/design/2024-01-15_7862deb2dfe4.png"></figure>Start with the base and insert 2 magnets into the two rectangular holes; no glue is required there.&nbsp;Next, with a bit of glue, add 1 magnet to the Base in the slider housing. Be cautious, as this magnet is the only one that needs attention to its side, opposite to the one you put in the center hole of the slider (to be attracted).&nbsp;Now, take the Slider and glue 9 magnets on the bottom holes; again, the center one must have the same side as the magnet you put in the base slider housing.&nbsp;Insert the slider into the base, add the lid, and tighten the lid screws.&nbsp;Finally, attach the button to the slider with the last screw.&nbsp;If the slider doesn&#39;t return to its position, slightly loosen the screws.&nbsp;If you want I added also a cord endcap to be printed, look at the pictures, insert the paracord or similar in the bottom hole of the Endcap_Base make one simple knot on both ends, finally close it with the Endcap_Lid.&nbsp;Also, take a look at the <a target="_blank" href="https://makerworld.com/en/models/134027" rel="nofollow noopener">Magnetic Pocket Screwdriver</a> I crafted.&nbsp;Hope you like it!&nbsp;(Got inspired by the Bit Bar by Big Design)&nbsp;Check out my other magnetic tools for your office:&nbsp;<figure class="table" style="width:94.97%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td style="text-align:center;"><figure class="image image_resized" style="width:49.2%;"><a href="https://makerworld.com/en/models/146614" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139309/design/2024-01-23_b0f041b578fc2.png"></a></figure></td><td style="text-align:center;"><figure class="image image_resized" style="width:50.26%;"><a href="https://makerworld.com/en/models/143760" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139309/design/2024-01-23_bf112a67f1d5b.png"></a></figure></td></tr></tbody></table></figure><ul><li><a target="_blank" href="https://makerworld.com/en/models/146614" rel="nofollow noopener">The magnetic cable clips</a></li><li><a target="_blank" href="https://makerworld.com/en/models/143760" rel="nofollow noopener">The magnetic ScrewGuard</a></li></ul>

SmartBits - Magnetic screwdriver bits holder

Tools

peterow

Mountain Range Reflection is a truly stunning piece that looks fantastic in any room!

Mountain Range Reflection Amazing Wall Art 

Wall Art

Ciuf_Ciuf

<h2>General description</h2>After the great success of the drainage project, I am proposing a simpler and more intuitive version, especially for new users and beginners who are approaching the world of multicolor.&nbsp;<a target="_blank" href="https://makerworld.com/en/models/54909#profileId-56456" rel="nofollow noopener">https://makerworld.com/en/models/54909#profileId-56456</a>&nbsp;The basic purpose is always to minimize purging material as much as possible to save on color changes and drastically reduce the amount of discarded materialI have decided to update the model and make it more user-friendlyThe basic idea was to make it a standard Bambulab Calibration, similar to the K calibrationSo, lines with numbers to instantly identify which value is the most accurate to assign to the purging of the respective materialBeing a test, it must be as economical as possible, so a test strip requires only 2 grams&nbsp;I'm leaving you the video of a guy who explains in detail how to use this type of calibrationI thank him for considering my project for the creation of a video on YouTube, and I'm pleased that I've shared his video<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=FP3CwBX6A4I"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/FP3CwBX6A4I" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h3> </h3><h3>Pre-print Procedure</h3>*Edit 03-01-2024*&nbsp;From one of the various print profiles you download, you'll need to set the color combination you desire<figure class="image image_resized" style="width:47.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_36c2f25737bbb.png"></figure>In my case, I'm calibrating these purge combinations, and the model will result like this<figure class="image image_resized" style="width:36.6%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_e5017ae8f46d08.png"></figure>If you want to change the color combination, simply use a different type of filament<figure class="image image_resized" style="width:37.2%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_a174ecda4566d.png"></figure>and the print profile will adapt to the combination you have set, as in this case<figure class="image image_resized" style="width:37.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_f1abfb2fe5f0a8.png"></figure>The model will update in real-time, allowing you to see immediately which color you are changingI've implemented additional print profiles to significantly streamline the procedure.While the process can be fast for those with a single AMS, it might be quite lengthy for those with multiple using the previous print profiles.With these new print profiles, there is also increased compatibility for the A1 Mini model.&nbsp;The idea of implementing the print profiles in this new way was suggested by Michael when he uploaded his print profile for the V1 model. I'll leave you the link to his Makerword channel (<a target="_blank" href="https://makerworld.com/en/u/2954682459" rel="nofollow noopener">https://makerworld.com/en/u/2954682459</a>)&nbsp;As on the previous model, it is necessary to reduce the purging material to allow us to calculate the material quantity adequately.The only significant difference is that this time we set all purging quantities to 0On the dual-object print profile, you can also do it manually.However, on the other print profiles, if you want to expedite the process, you can set the multiplier to 0, instantly reducing the purge to 0<figure class="image image_resized" style="width:35.51%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_f161c5ce7c0868.png"></figure>Now you can start the printing process&nbsp;Note: Do not touch any other parameters I've set, or the colors won't be printed in the correct order<h3>Calibration reading</h3>After completing the print, for calibrating the K factor, we need to read and determine the most accurate value to set as the purging quantityWhat you will find in front of you will be this<figure class="image image_resized" style="width:46.93%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_02e09355d1abf8.jpg"></figure>As you can see inside the two green rectangles, that is the exact moment when the material is purged, and the next color takes over.<figure class="image image_resized" style="width:46.78%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_617da72c674e78.jpg"></figure>At this point, all that's left is to identify the correct value and set the purging quantity for that specific color changeFor these tests, it's highlighted that 150mm^3 of material is required to perform the color change<figure class="image image_resized" style="width:46.33%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_e9817c7179a71.jpg"></figure>In this specific case, the quantity is identical for both color changes, but for other combinations, it may varyAs you can see, the difference between the default values of Bambustudio and the ones just found is significantly lower.This allows us to reduce material waste and significantly cut down on print times, decreasing the time the printer takes to change the filament<figure class="image image_resized" style="width:35.41%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_a67e103190684.png"><figcaption>BEFORE</figcaption></figure><figure class="image image_resized" style="width:35.53%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_ab83cab72d7d18.png"><figcaption>AFTER</figcaption></figure>&nbsp;

AMS Purge Calibration V2

Software Upgrades

madizmo

My favorite show that needed to jazz up my office door

The Office door sign

Home/Office

Infinity 3D Prints

I POSTED A PIC Of 2 MONTHS OF USE WITH THE A1 SERIES BOWDEN TUBE SET UP WITH THE 4 WAY HUB. THE PTFE TUBES GET SHREDDED AFTER ONLY A SHORT TIMESO THIS KEEPS THE TUBES STRAIGHT AND GROUPED TOGETHER IN ONE STRONGER BUNCH , DONT FLOP AROUND AT THE BASE ANYMORE AND ARE PROTECTED. I hope to not change out the tubes every two months that’s a wasteTHIS ALSO FIXES THE ANGLE THE FILAMENT ENTERS INTO THE TOOL HEAD KEEPING THOSE MUTICOLOR PRINTS RUNNING SMOOTHLY<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/324594/2023-12-29_d246851e7887c8.gif"></figure>THIS WAS DESIGNED USING PLA . So other materials might be a tighter fit . If finding it too tight you can always scale up half a percent :) !! <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/324594/2023-12-29_fc3906b20073d8.gif"></figure>Can be used on any of the a1 printers.Internal id is 9.2mm

A1/A1MINI PTFE TUBE PROTECTION /FAILED TO FEED FILAMENT INTO TOOL HEAD FIX

A1 upgrades 

BC Designs

Cardboard spool adapter made to fit Eryone spools measuring 197mm.&nbsp;Locating pegs top/bottom and the holes left open at the sides for clipping filament in.&nbsp;Included 3mf file prints at 0.20 in around 25 mins. Print 2 per spool.

Bambu Lab AMS Cardboard Spool ring - Eryone spool

Spool adapters

im1badmf

The Book Barn is the perfect gift for any reader. The 3d printed Book Barn is designed to save the spline on your favorite book(s), while also serving as a page holder(bookmark). Store your reading glasses inside the Book Barn and never forget where you placed them again. &nbsp;

Book Barn

SPStudio

<h4>I update, revise and improve my design for my fixes very often. Please only use my Print Profile (Labelled as Designer or SPStudio) to ensure this fix is updated & work well. Profile with Non-Designer tags may be of poor functionality or non updated model.</h4>Click on Like if this model helped you in some way. It is very important and will help increase the exposure of this design to more people who might need it. Cheers!&nbsp;&nbsp;This will be my final Ams internal fix as i believe there is no bettor way to fix it internally anymore. Thank you so much for your support.&nbsp;<blockquote>AnnouncementNew and Improved V2 Versions for the Ams Buffer Fix <a target="_blank" href="https://makerworld.com/en/models/101046" rel="nofollow noopener">Before Buffer</a> and <a target="_blank" href="https://makerworld.com/en/models/85989" rel="nofollow noopener">After Buffer</a> have just been released. Do check them out in my profile to see what are the improvement. Thank you for your continuous support.<figure class="image image_resized" style="width:33.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393216/2023-12-21_db335e9276f41.jpg"></figure></blockquote><h2> </h2><h2>Introduction</h2>Failed to pull back filament error can be caused by multiple different variables & factors. This is a part of an series of Ams fixes that i have designed which can complement each other when used together. I do suggest you install all my fixes together for the 0ptimal effect to help your filament travel properly across the entire system which in turn can help improve, reduce or remove any potential Ams errors.&nbsp;I have grouped all fixes into their respective Collection for ease of searching what to install.&nbsp;V2 Collection are improvements done on the shortcoming of V1 Collection. Feel free to try V2 Collection and if it doesn't work properly then you can try the V1 Collection. You can easily find each of the Collection by clicking on the Collections tab on my profile.&nbsp;Unfortunately there isn't a single fix that can 100% work for everyone. What works for others, may not work for you but my fixes is definately a great place to start and have worked for majority of the users. My fixes are precisely measured then modelled. A Proper Fix would have the highest chance to reduce or solve the error.&nbsp;<figure class="image image_resized" style="width:81.05%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393216/2024-01-09_cd9c426e40212.jpg"></figure><h2> </h2><h2> </h2><h2>If you are too bored to read the entire lengthy write up explaining the need for this fix, here is the TL:DR.</h2>&nbsp;What is this? Ams Filament Pull Back Fix V2 Upgraded is a total revamp design of the <a target="_blank" href="https://makerworld.com/en/models/47982#profileId-49834" rel="nofollow noopener">hugely successful previous model</a> for correcting the internal Ptfe tubes angle inside the Ams and maintain a straight Ptfe feeding into the Ams motor to reduce friction and pressure.&nbsp;&nbsp;Important Note: This new design is used to replace the older version. You can choose to use any of the version or try 1 then if it doesn't work very well then try the other one, but please DO NOT use both new and old model together. It will make things worse.&nbsp;&nbsp;Main difference with the previous model <a target="_blank" href="https://makerworld.com/en/models/47982#profileId-49834" rel="nofollow noopener">Ams Fix Failed To Pull Back Filament Error</a><ol><li>Completely New Design, even accurately designed to solve the problem compared to the original version.</li><li>Will NOT affect your warranty as its reversible.</li><li>Even well supported by the new screws design comparing to my previous fix or other similar clones trying to do a lookalike workalike.</li><li>Precise measurement for reduced friction of filament moving through</li><li>Helps reduce the internal Ptfe wear and tear</li><li>Fix is now much closer in distance to the root of the problem.</li><li>Ensuring nearly ZERO possibility or chances of the tube flexing near the entry point of the Ams internal filament hub causing that misalignment that might cause an error to pop up.</li><li>Angle of the entry for the Ptfe into the Ams internal Filament have been re-optimised once again..</li><li>ez to install, just unscrew the 2 screws at the Ams internal Filament Hub and put in the fix then put back the screws.</li><li>As the fix supporting the Ptfe is now right outside the entry of the <a target="_blank" href="https://wiki.bambulab.com/en/x1/maintenance/replace-filament-hub" rel="nofollow noopener">Ams internal filament hub</a>, possibility of failure to fix the problem because of bent or misshaped tube is now greatly reduced.</li><li>This fix have been tested for on 1 X1C, 1 P1P and 2 P1S for about 94800 retractions so far as of this listing.</li></ol>&nbsp;Please ignore the silver screw i used as seen in the install video, just use the same original 2 black screws from your internal Ams filament hub. In order to make and design and measure this fix, i rounded my own screw threads after assembling and disassembling 50 times for variations i tested against height, angle and thickness.&nbsp;Please follow the installation video closely to ensure you are installing it correctly. Failure to follow will affect how well the fix will work. Video at end of page.&nbsp;&nbsp;Who needs this fix? 1) Constantly having errors like Failed To Pull Out Filament and similar related2) The Ams motor sounds like struggling when move filament in and out of the Ams to the Extruder, like a lot of friction when moving.3) Ams cannot load or unloading properly. (Not including Spool being too light or a break of filament in the Ams)4) Having a constant struggle on any of your Ams slots, people complained about Slot 2 and 3 but this fix is designed to fix all of 4 slots for Failed To Retract / Pull Out Filament Error.&nbsp;&nbsp;Why choose this fix instead of other similarly designed fix?I do think that in theory, this new fix will work great and likely even superseding in performance when compared to my ver 1 design.&nbsp;This is ez to print but yet its measurement is very precise. I have spent over 60 hours to design and confirmed the proper angle to move the internal Ptfe to allow filament to pass through smoothly and then printed multiples models to ensure that my fix works by properly aligning the internal Ptfe tube to reduce and possibility even eliminating the dreadful Failed To Pull Out Filament Error or similar related problems.&nbsp;&nbsp;<h2>Preparation Video (Proper removal of support and ensure Ptfe tube fit)</h2><figure class="media"><div data-oembed-url="https://youtu.be/QZkzHy08jVI"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/QZkzHy08jVI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/393216/2023-11-04_20b419972641e.jpg"></figure>&nbsp;<h2>Installation Video</h2><figure class="media"><div data-oembed-url="https://youtu.be/6rs1xp-rX5Q"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/6rs1xp-rX5Q" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>(As the location of the fix is right at the entry point of the Filament internal hub do make sure you align then push in the Ptfe Tube tightly making sure that the Ptfe tube actually entered the internal filament hub.)&nbsp;Also take note to the arrows at the side, make sure the fix is NOT clipping or pressing on any of the Ams wiring when you are installing it. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/393216/2023-11-05_c033df2f88abb.png"></figure>Pic from Bambu wiki.&nbsp;<h2>Important Notes:</h2>Please watch the video and description carefully. Its really important to make sure the fix installed correctly to let it work properly&nbsp;Note 1: The Ptfe Tube is supposed to be tight and snug for the support with precision. Plz make sure you installed it correctly as per the video instruction.&nbsp;Note 2: Please ensure you followed the preparation video closely before installing to ensure all supports are CLEANLY removed so the fix will work perfectly&nbsp;Note 3: You are required to properly assembled the Ams including the 2 screws that you unscrewed during the disassembly as this model require everything to be tight and snug for it to work properly.&nbsp;Note 4: When reassembling try to adjust the 2 very long wires connecting to the rear of the Ams Circuit board, don't let them press on any of the Ptfe tube. I don't think it matters but its a good practice.&nbsp;Note 5: Do NOT overtighten the screws please. As shown in the installation video, just tight then finger tight will work Don't jam it all the way down please. The screw is just to hold the fix in place.&nbsp;&nbsp;&nbsp;<h2>What Mod / Fixes / Enhancement do i offer?</h2>Please don't download the wrong one. Only those in the photos below is designed by me who painstakingly took a lot of time to measure carefully and design just to get it working. #SupportOriginal Love you guys for all the support so far!&nbsp;- <a target="_blank" href="https://makerworld.com/en/models/47982" rel="nofollow noopener">Ams FIX Failed To Retract Filament Error (a preventive measure and solve the bay 2 and 3 error and prevent bay 1 and 4 to have any possibility of having an error due to tension and friction)</a> (Updated design on the 2nd photo below, try 1 then if it doesn't works properly for you then install the other one.)&nbsp;<figure class="image image_resized" style="width:74.94%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393216/2024-01-10_2e40f9b49d622.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/56906" rel="nofollow noopener">(BRAND NEW) Ams Filament Pull Back Fix V2 Upgraded - Completely New Design Upgrade For Ams Filament Pull Back ERROR! Precisely Measured</a>&nbsp;<figure class="image image_resized" style="width:75.86%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393216/2024-01-10_9c729f1a3501a.webp"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/52782" rel="nofollow noopener">- Ams Buffer Fix For Failed To Pull Back Filament Error (reduce wear on the external Ptfe tube and allow the most smooth, least friction angle to go into the Ams buffer thus reducing the possibility of an error popping up)</a>&nbsp;<figure class="image image_resized" style="width:75.68%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393216/2024-01-10_14c8811c47696.webp"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/101046" rel="nofollow noopener">- V2 Ams Buffer Fix For Failed To Pull Back Filament Error (reduce wear on the external Ptfe tube and allow the most smooth, least friction angle to go into the Ams buffer thus reducing the possibility of an error popping up)</a>&nbsp;<figure class="image image_resized" style="width:76.45%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393216/2024-01-10_6194006084695.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/53037" rel="nofollow noopener">- Ams Fix - Stack the Ams on tp (Using a carefully measured holder to hold the Ptfe in a curved angle that will allow filament to go through with the least possible amount of friction when the Ams is stacked on tp of the printer)</a>&nbsp;<figure class="image image_resized" style="width:77.35%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393216/2024-01-10_e6ff2df6c7873.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/58543" rel="nofollow noopener">- Ams Buffer Ptfe Right Guide Mount Fix will correct and maintain a nearly 100% straight line when the Ptfe tube exit the Ams buffer to move into the printer extruder.</a>&nbsp;<figure class="image image_resized" style="width:78.46%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393216/2024-01-10_f95cf24ce5c9e.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/85989" rel="nofollow noopener">- V2 Ams Buffer Right Ptfe Guide Mount - The Fix For Failed To Pull Back Filament a newly improved fix designed to replaced the V1 This will correct and maintain a nearly 100% straight line when the Ptfe tube exit the Ams buffer to move into the printer extruder. ez Installation. No screws needed!</a>&nbsp;<figure class="image image_resized" style="width:79.5%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393216/2024-01-10_6ddf689393292.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/63021" rel="nofollow noopener">- Extruder Ams Filament Pull Back Fix will correct and maintain a nearly 100% straight line to move the filament in and out of the extruder. This will also reducing wear on the Ptfe tube. Its design allow the filament to travel in the most smooth, least amount of friction and pressure for the proper angle to go into and exit the extruder thus greatly reducing the possibility of an Failed To Retract Filament error or similar errors from popping up.</a>&nbsp;<figure class="image image_resized" style="width:82.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393216/2024-01-10_4c9e59fa5529e.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/103987" rel="nofollow noopener">- V2 Extruder Ams Filament Pull Back Fix will correct and maintain a nearly 100% straight line to move the filament in and out of the extruder. This will also reducing wear on the Ptfe tube. Its design allow the filament to travel in the most smooth, least amount of friction and pressure for the proper angle to go into and exit the extruder thus greatly reducing the possibility of an Failed To Retract Filament error or similar errors from popping up.</a>&nbsp;<figure class="image image_resized" style="width:81.99%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393216/2024-01-10_69d2ccb8ac279.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/67779" rel="nofollow noopener">- The Smooth 4 Way Splitter. Look No Further. Combined with Ams Hub Lite together with this small attachment, you will have the Smooth 4 Way Splitter.</a>&nbsp;<figure class="image image_resized" style="width:83.64%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393216/2023-11-19_96f9eed020e9b.gif"></figure>&nbsp;<h2>Removal Video</h2><figure class="media"><div data-oembed-url="https://youtu.be/8sDRKjJCU2U"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/8sDRKjJCU2U" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;<h2>Additional Notes</h2>The error itself is complicated and non definitive. Whatever cause the error today might not be the same area that cause the error again, same with person A and Person B setup, as the error itself is mainly due to tension with friction triggering the sensors in the machine.&nbsp;I would suggest you download and try and install all my fixes together for the proper effect as together they will ensure a smooth delivery of the filament with much lesser friction (read write ups) and hopefully that will help and reduce or resolve the error. If you use only one or 2 of the fixes the error could still happen as there are still other area might still be causing excessive friction.&nbsp;

AMS Filament Pull Back Fix V2 Updated

X1C upgrades 

REKTorSET

I really wanted to gift some custom lithophane ornaments this Christmas and needed a reliable way to light them since some recipients have pre-lit Christmas trees. I bought some led tea lights on amazon and modeled this cap to hold them snug and upside down. The threaded_insert can be glued directly to the ornament bulb and the light_holder then threads into it. You can use the settings in <a target="_blank" href="https://lithophanemaker.com/Lithophane%20Sphere.html" rel="nofollow noopener">https://lithophanemaker.com/Lithophane%20Sphere.html</a> to ensure that your ornament fits nicely. &nbsp;I also followed this video by EB3D Printing to get my photo's setup. <a target="_blank" href="https://youtu.be/AEQV8MGdswU?si=dVieBNi1ArHZclvq" rel="nofollow noopener">https://youtu.be/AEQV8MGdswU?si=dVieBNi1ArHZclvq</a> &nbsp;Printed in some generic Silk PLA I had on hand without supports.&nbsp;Tea Lights: <a target="_blank" href="https://www.amazon.com/gp/product/B0BV6ZYSJG" rel="nofollow noopener">https://www.amazon.com/gp/product/B0BV6ZYSJG</a>&nbsp;Hope some of you enjoy my first model and enjoy your holidays!&nbsp;

Lithophane Ornament Cap

Lithos

MadMax3D

Check out my new and <a target="_blank" href="https://makerworld.com/en/models/105448#profileId-112537" rel="nofollow noopener">improved version</a> that also works with the A1 printer<figure class="image image_resized" style="width:9.01%;"><a href="https://makerworld.com/en/models/105448#profileId-112537" target="_blank" rel="nofollow noopener"><img src="https://lh3.googleusercontent.com/pw/ABLVV84lQ342EQyh0hZqx_iXGvAcjWcv7131s3yTuuwsw_Faa0WUlUW8RcZeHFm1LzoDIXkenJSzbeqA8HE8VwbGDU-9y6PrzgkDnnkOYXebyrxuh9qU5eXCGefzWEo1hbkuGKFQB6KmEMEuCk7o6xkkXHhUwdpJMS8gvowvODr53G8jxHVRfzp-UpLk6jpAOGx6wH7lVv0PGUhVDtp2IK6dcwx2g5AJYRFpFQtJUcB-ptKHCqNNhaUIUb-2s5Yj0VLF2NO51ExwVfzAC4VMjhBLAHwUHb1b1IP3OkWpsgWyoMcN0LXtXr876YLKzG2qvdfuG06fppFPZICjCmVWlF1yNGrhMK4eXb1mmIOyMKtbFGoJS9sxEUpkVSFkqF06lJGjSaRAANzVOl4WwnKt3vb0DiTvDbdH_En-PRPDCHyEGZe4rtrPFe_gDec5QU0l2-ur_EbYx83tMAlpdVMVdVJtYUJPxzd8QDTsc_L3ujbl6rcrtZsyO30BLajq4hp_U-m7zvrNYWCsGuBI5rUTHpiyR-iPJqjaJfyEhczQ-X3bHureGvtNl97O5ljGvaERjDpsmEbdpIEvf5v2dy5jurZ7zzLe4rzi2bBtq2ewpGR0mV8bceLp1r9HIjgQKIAPmdjic1zAhfkFmTHb3403eqO_fMOfzCU3bYgwp4OqGlz2gom1Bji11DITYsj_ai7090X0iSIjxkO-r6k0q6eFn_tod61i8qLBhAC4bUtQmTZpLu8V8pD4ucfVj4X5F3RX84rbop4FwsFEXx0QD_aQ9PNewjZgB3LPDIAeER9wJ8rE6MSwj0x8YSLec2zRXIVXNlUfqAaiLoXlrXe71gzGzdBsWeOcglVxWsZLAx0SSZaTli672YEU7mzswv5K2JLX3hLbG6SuR4GT-N8DBhskuT7G0C_gHQ3iawNawrRZkrjMQOWAM-6Ae2zG8AaNW5MhNVMKddko5-yWNTfcfhPu24svhpz_NUwiaaiOG0PHVjlwMEpP9Dg=w1276-h957-s-no-gm?authuser=0"></a></figure>Check out my lead screw cleaner for the <a target="_blank" href="https://makerworld.com/en/models/77336#profileId-81722" rel="nofollow noopener">A1 Mini</a>&nbsp;I was looking for a simple, hands-free way to clean the black soot off the lead screws on my X1C, MK3S and Prusa Mini. To use this cleaner, simply stuff some tissue, paper towel or sponge material in the cavity, douse it in IPA and clip it to the lead screw. Move the z-axis up and down. Be careful not to crush the cleaner between the top or bottom.I've included the Fusion file which has a “snugness” parameter called SNUG. This parameter adjusts the tightness of the fit and is set to .2mm in the .stl. It adjusts the distance between the inner faces of the clip portion. If the clip is too tight, reduce the snugness parameter to .1 or to 0.<a target="_blank" href="https://photos.app.goo.gl/rwRcAqLDimVnrqh19" rel="nofollow noopener">Video Bambu Front Screw</a><a target="_blank" href="https://photos.app.goo.gl/USkbGSJ66UxdCw7VA" rel="nofollow noopener">Video Bambu Rear Screw</a><a target="_blank" href="https://photos.app.goo.gl/EP9oCR47BrkFgzwYA" rel="nofollow noopener">Video MK3S Dual Cleaning</a>I printed it in PLA, .2mm layer height, no supports and no brim.&nbsp;Update 1 Per request for those without Fusion 360, I've added three new .stls with preconfigured snugness settings. Snugness refers to the distance between the inner faces so that it clips snugly onto the screw 8mm. Snug 0 = 8mm, Snug .2 = 7.8mm and Snug .4 = 7.6mm.&nbsp;Update 2 I have provided a configurator in OnShape to be able to create a model with your custom snugness setting between 7.4 and 8 mm. OnShape is a CAD program, much like Fusion 360, but you don't need to have a copy, or even an OnShape account. The design will open in a browser window where you can enter the desired value and generate your own model with custom snugness dimension. See “OnShape Lead Screw Customization.pdf” in the documentation section.