Fyrby Additive

V-Spooler

Mechanisms

This Hueforge is based on a picture I took in Åre while riding a Skidoo up a trail. An elk appeared and stopped and stared at me, shortly followed by her children who crossed the trail behind her, and vanishing off into the white.&nbsp;Fyrby Additive holds a commercial Hueforge license.<h4>Colours</h4>I used the following colours in this print, but any black, white, light grey and dark blue will probably work:<ul><li>PLA BambuLab Basic Black</li><li>PLA+ eSun Dark Blue</li><li>PLA BambuLab Basic Gray</li><li>PLA BambuLab Basic Jade White </li></ul><h4>Printing</h4>There is a pre-configured profile for Bambu studio available as well as the separate STL if you want to do it manually. This Hueforge is setup to use a 0.2mm nozzle and expects a 0.1mm bottom layer and a 0.08mm layer height with 100% infill and 1 wall. The Hueforge Describe follows:&nbsp;<blockquote>Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mmThe Model is 114x152mm in size You may print at higher layer heights below the Min Depth of 0.26mm The Max Depth is 4mm and the Actual Depth is 4mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.66mm) swap to Blue At layer #11 (0.9mm) swap to Black At layer #15 (1.22mm) swap to Blue At layer #16 (1.3mm) swap to Gray At layer #17 (1.38mm) swap to Blue At layer #21 (1.7mm) swap to Jade White for the rest.</blockquote>

Elk On The Trail - Hueforge

Hueforge

Here are some bulb lamps for the Bambu Lab LED Lamp 001 kit. The kit contains a little puck shaped USB lamp with a small but quality feeling switch.&nbsp;As Bambu Lab have recently started selling transparent PETG I thought it would be nice to bring the two together as while printing clear transparent PETG is challenging whatever the result it is great at diffusing light!&nbsp;The bulbs are removable like normal bulbs, so if you want to have different colours to change around, you can, as well as any extra bulb styles that may be added in the future!&nbsp;If you are able, any way you may decide to support me as a creator is gratefully received:<ul><li>Purchase the LED Lamp kit from Bambu Lab at the bottom of the page</li><li>Boosts are also nice!</li><li>If you are generally a fan of my work <a target="_blank" href="https://www.printables.com/@FyrbyAdditive" rel="nofollow noopener">I also run a club on Printables</a>!</li></ul><h4>Printing</h4>Pick the profile for the style of bulb you would like to print. Currently there are normal and candle style bulbs available.&nbsp;Note that the whole print is configured for a 0.6 nozzle, but it should be easy to change for a larger/smaller one. Note that if you have larger nozzles available they are better for transparency. The bulb part of the print is set to hot and slow with transparency in mind, however I am not the biggest PETG expert so tips are welcome.<h4>Assembly</h4>It&#39;s fairly straight forward, the only thing worth mentioning is I used a reverse thread for the bulb which has nothing to do with me imagining people screwing it in the wrong way. Hehe.

Bulb Lamps For LED Lamp 001

LED Lamp 001 Kit

I wanted a little case for one of my XAIO boards and a variety of mounting options as I have a few sitting about so I can use them in different ways. Later I realised I could modify it to fit the other XAIO models.&nbsp;If you are looking for something fun to do with your device and it is ESP32 based, have a go at setting it up with Home Assistant via ESPHome and plugging in and configuring some supported sensors, more information can be found in <a target="_blank" href="https://wiki.seeedstudio.com/XIAO_ESP32S3_esphome/" rel="nofollow noopener">this guide</a>. Sorry I am not able to support you with ESPHome or electronics :)&nbsp;Currently there is a simple base, a wall mount base and an 8x2mm magnetic disc mount option available, we will be at least adding a magnetic base in the short term and possibly a stand.<h4>Required For Assembly</h4><ul><li>8x M2 inserts, CNC Kitchen/Ruthex/others of similar size</li><li>4x M2x8 screws, for the lid</li><li>4x washers, for the lid</li><li>4x M2x12 screws for the main body/base</li><li>Pin strip</li><li>Soldering iron</li><li><a target="_blank" href="https://www.seeedstudio.com/Grove-Shield-for-Seeeduino-XIAO-p-4621.html" rel="nofollow noopener">Grove Base</a></li><li><a target="_blank" href="https://www.seeedstudio.com/XIAO-ESP32S3-Sense-p-5639.html" rel="nofollow noopener">Seeed XAIO ESP32S3 Sense</a>/<a target="_blank" href="https://www.seeedstudio.com/XIAO-RP2040-v1-0-p-5026.html" rel="nofollow noopener">RP2040</a>/<a target="_blank" href="https://www.seeedstudio.com/Seeeduino-XIAO-Arduino-Microcontroller-SAMD21-Cortex-M0+-p-4426.html" rel="nofollow noopener">SAMD21</a>/<a target="_blank" href="https://www.seeedstudio.com/Seeed-XIAO-BLE-nRF52840-p-5201.html" rel="nofollow noopener">nRF52840</a>/<a target="_blank" href="https://www.seeedstudio.com/Seeed-XIAO-ESP32C3-p-5431.html" rel="nofollow noopener">ESP32C3</a>/<a target="_blank" href="https://www.seeedstudio.com/Seeed-XIAO-BLE-Sense-nRF52840-p-5253.html" rel="nofollow noopener">nRF52840 Sense</a></li></ul>For the optional magnetic mount you will need 1-3 8x2mm disc magnets. Probably a good idea to use three if you are plugging in accessories and use some glue to ensure they stay in place.<h4>Printing</h4>Please use the pre-configured profile from the top of the page and not the raw model. It has the base and lid options on the first plate. The second plate has the main body options. Delete the optional parts you do not want to use.&nbsp;Use the “sense” objects of the lid and the main body if you have the ESP32S3 Sense, else use the “others” objects along with the base of your choosing. &nbsp;If you are configuring the unconfigured 3MF yourself it is an easy print with a 0.4 nozzle. The main body needs hybrid tree supports to support the tray and SD card/switch/USB-C port holes for the “sense” variant. I printed the above at 0.16 layer height so it came out smooth.<h4>Post</h4>It is sometimes the case that there is a small mess under the tray where the supports were. Take a sharp, thin knife and make it tidy to prevent issues with the SD card slot.<h4>Assembly</h4><figure class="table"><table><tbody><tr><td> </td><td>First, get out your soldering iron and solder pin strip into the holes at the side of the Seeed XAIO unit.&nbsp;Following this, plug the soldered unit into the Grove base.&nbsp;If you are using a device with a camera, remove the camera unit if it is attached.If you are using a device with an antenna, connect the antenna.</td></tr><tr><td>Install 4x M2 inserts into the four holes that protrude from the sides of the main body.</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/460645/2024-01-23_0wncjc84j7yz.png"></figure></td></tr><tr><td>Install 4x M2 inserts into the four holes in the base.</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/460645/2024-01-23_tth4iuex6pid.png"></figure></td></tr><tr><td>If you are using the optional screw mount base, mount it to its final location after the inserts have cooled.</td><td><figure class="image"><img src="https://media.printables.com/media/prints/734466/rich_content/5ecf18a9-06ad-49f6-a2c2-c53f55029c03/thumbs/cover/800x889/png/screenshot-2024-01-25-at-005422.webp"></figure></td></tr><tr><td>If you are using the optional magnetic mount base put a tiny dab of glue in the holes and poke in the magnets.</td><td><figure class="image"><img src="https://media.printables.com/media/prints/734466/rich_content/75671666-1b75-4605-9b02-6832781fd08d/thumbs/cover/800x764/png/screenshot-2024-01-25-at-015350.webp"></figure></td></tr><tr><td>If you are using a device with an antenna, thread the antenna through the massive hole. ensure the cable is placed so that it goes up through the thin section and rests at the side.</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/460645/2024-01-23_ddsbgqsy5ojl.png"></figure></td></tr><tr><td>Carefully insert the boards into place. Being careful aligning the USB port and switch is the key to success.&nbsp;Keep the cable antenna in place so it is aligned with the gap in the side if one is present.</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/460645/2024-01-23_uik4hixlg6rf.png"></figure></td></tr><tr><td>Align the main body on top of the base, you will need to fold the antenna if you have one to make it fit well.&nbsp;Screw M2x12 screws in the 4 holes here. Careful to not damage the MCU or base board.&nbsp;We do not use washers for these screws, so be careful not to connect them too tightly.</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/460645/2024-01-23_bk9j0qlqwmp4.png"></figure></td></tr><tr><td>If using a device with a camera, connect the camera to the board and insert it into the upper tray. Ensure it is pushed up fully into the upper tray.</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/460645/2024-01-23_2ic9k4hq0rki.png"></figure></td></tr><tr><td>Connect the lid with four M2x8 screws and washers. If you are using a device without a camera be sure to use the lid without a hole.&nbsp;Congratulations, you are done!</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/460645/2024-01-23_f0rhwhzurnhv.png"></figure></td></tr></tbody></table></figure><h4>Versions</h4>2024012701: Enlarge USB-C port hole to manage different pin strip offsets.2024012301: Initial version.<h4>ESPHome</h4>Here is a working config file for ESPHome for the command line utility for the XAIO ESP32S3 Sense board, which is the one I initially posted here. Note that you need to enter your own wi-fi details, and depending on how you want to orient the device you may need to change the “vertical_flip” and “horizontal_mirror” settings.&nbsp;Sorry you will need to work out ESPHome things by yourself but I wish you the best of luck :)&nbsp;<blockquote># Configuration for ESPHome esphome:  # Name of the ESP32-S3 device  name: xsense1    # PlatformIO build options  platformio_options:    build_flags: -DBOARD_HAS_PSRAM    board_build.arduino.memory_type: qio_opi    board_build.f_flash: 80000000L    board_build.flash_mode: qio# Configuration for ESP32 esp32:  board: esp32-s3-devkitc-1  framework:    type: arduino# Enable logging logger:# Enable Home Assistant API api:# Over-the-Air update configuration ota:# Wi-Fi configuration wifi:  ssid: "Your Wifi SSID"  password: "Your Wifi Password" # Enable fallback hotspot (captive portal) in case wifi connection fails  ap:    ssid: "Xiao-Esp32s3 Fallback Hotspot"    password: "MoLTqZUvHwWI"# Captive portal configuration captive_portal:# Configuration for the ESP32 Camera esp32_camera:  id: espcam  name: My Camera  external_clock:    pin: GPIO10    frequency: 20MHz  i2c_pins:    sda: GPIO40    scl: GPIO39  data_pins: [GPIO15, GPIO17, GPIO18, GPIO16, GPIO14, GPIO12, GPIO11, GPIO48]  vsync_pin: GPIO38  href_pin: GPIO47  pixel_clock_pin: GPIO13  resolution: 800x600  vertical_flip: false  horizontal_mirror: false   # Configuration for the ESP32 Camera Web Server esp32_camera_web_server:  - port: 8080    mode: stream  - port: 8081    mode: snapshot</blockquote>

Seeed XAIO & Grove Base Case

Seeed Studio

These items are made to fit to standard 40mm fans commonly made by computer, chassis and rack fan manufacturers so that they can be more securely sealed to a fitting you are connecting it to.&nbsp;The gaskets are available in 0.5, 1 and 2mm thicknesses and should be printed out of a flexible material.&nbsp;If you are using a Noctua fan or similar which has rubber bits on the corners, remove these for a proper seal to be made. If the screw holes seem rather large, in some spec sheets for 40mm fans I have seen requirements for holes up to 4.3mm wide for screws.<h3>Printing</h3>The profiles here are for Bambu TPU-HF. I also provide a remix of colorFabbs Varioshore settings for Bambu printers <a target="_blank" href="https://www.printables.com/model/528099-bambu-studio-colorfabb-varioshore-profile" rel="nofollow noopener">here</a> that can be used to print this model.

40mm Fan Gaskets

Fan Gaskets

<h3>Design</h3>I needed a cover for a fan on an intake of a 140mm Noctua fan to help ensure it does not get damaged and designed this grill to fix the problem and added an optional variant.&nbsp;One design has fins and one design is completely flat. Please review them and choose which one suits you best. These fit nearly any 140mm fans as the screw holes are in a standard location.<h3>Printing</h3>This model has been designed to with its back flat on the print bed with no supports. I used PLA which worked fine.

140mm Fan Grill Covers

Fan Grill Covers

If the poop emoji was going to celebrate Christmas, this is how it would do it. Make your Christmas totally excrement with this festive Christmas poo! There are separate solid, hollow and magnetic versions supporting either 5x2mm or 6x2mm disc magnets.&nbsp;Printing&nbsp;The solid and hollow versions are scaled down to 25% in the profiles provided here, hence if you want a really large one you can upscale it without losing quality.&nbsp;The magnetic version is already scaled down and not re-sizable without losing support for the magnets. They are made to be printed directly on the print bed in normal orientation with no support. I used a 0.4 nozzle with a 0.2mm layer height for everything. &nbsp;The colours I have used in my print above are all Extrudr NX-2 matte colours - brown, grey, black and red.&nbsp;Magnets&nbsp;If you have chosen a magnetic version for safety purposes put a small amount of glue on the magnets before insertion. &nbsp;The gap may or may not be tight depending on tolerances on the magnet/hole so the easiest way to do this is to put the magnet on the back of a metal spoon, dab the glue, carefully align the magnets over the holes and apply pressure. It should pop right in.&nbsp;Versions&nbsp;2023.11.14: Initial version.&nbsp;Support&nbsp;If you like our poop please consider joining <a target="_blank" href="https://www.printables.com/@FyrbyAdditive" rel="nofollow noopener">our club on Printables</a>!

The Christmas Poop Emoji

Poop

Christmas is coming, so get ready with this selection of decorations ideal for hanging from Christmas trees or anything else you can think of with a bit of thread or string!&nbsp;If you would like to view these 3D models in colour in your browser and with optional AR, this is available <a target="_blank" href="https://collaborate.shapr3d.com/v/uIpmbGUF-_EVrSilK4drg" rel="nofollow noopener">directly at the Shapr3D viewer here</a>.&nbsp;Printing&nbsp;These ornaments are made to be printed with one of the circular faces directly on the print bed with no support. I used a 0.4 nozzle with a 0.2mm layer height for everything.&nbsp;As there are many models with many colouring possibilities, there are a few print profiles available with different colourings already made.&nbsp;If you decide to import the normal 3MFs yourself rather than using one of the profiles, ensure to “assemble” all the bits from each one after each import in “Process→Objects” in the “Prepare” tab before doing anything else.&nbsp;Versions&nbsp;2023.11.12: Initial version.&nbsp;Support&nbsp;If you like our work please consider joining <a target="_blank" href="https://www.printables.com/@FyrbyAdditive" rel="nofollow noopener">our club on Printables</a>!

Hangable Christmas Ornaments

Christmas

A Yin & Yang fridge magnet, made for 5x2mm disc magnets.&nbsp;PrintingThis is made to be printed with its front side directly on the print bed with no supports. An 0.4 nozzle and a 0.2mm layer height worked well for me. The profile I have added here was used to produce the model in the above pictures with Extrudr NX-2 matte black and matte grey.&nbsp;Magnets&nbsp;For safety purposes I put a small amount of glue on a magnet before insertion. As the gap is tight to accommodate optionally using no glue, the easiest way to do this is to put the magnet on the back of a metal spoon, dab the glue, carefully align the magnets over the holes and apply pressure. It should pop right in.&nbsp;Versions&nbsp;2023.10.25.b: Add 0.1mm extra spacing for the 5x2mm disc magnets and a little fillet around the edges where the magnets are inserted.2023.10.25.a: Initial version.&nbsp;Support&nbsp;If you like our work please consider joining <a target="_blank" href="https://www.printables.com/@FyrbyAdditive" rel="nofollow noopener">our club on Printables</a>!

Yin & Yang Fridge Magnet

Fridge Magnets

A nice feather display to hang on your wall. This was made as an experiment in cutting bridged strings as part of the model design, and to test out the Shapr3D history based parametric modelling beta.&nbsp;If you would like to view the 3D model in colour in your browser and with optional AR, this is available directly <a target="_blank" href="https://beta.collaborate.shapr3d.com/v/DFOd0GG4D-2dWSLYYTud3" rel="nofollow noopener">at the Shapr3D viewer here</a> (please let me know if this link breaks, as it was made from the Shapr3D Parametric beta).&nbsp;Printing&nbsp;There is a pre-painted file for Bambu users, as well as a separate normal 3MF file. Bambu users should have arachne walls pre-selected. I hear that in Cura or PrusaSlicer you should select Print Thin Walls to make the print work, but have not tested these slicers personally. Please use a 0.2 mm layer height and a 0.4 nozzle.&nbsp;Post-Printing&nbsp;This model is designed to have the outer parts of the feathers removed carefully as pictured. I have not really worked out the best way to do this yet to keep them straight. It also looks great and supports the outer parts of the feathers as per the second picture, if this is what you wish.&nbsp;Support&nbsp;If you like my work, please consider joining my <a target="_blank" href="https://www.printables.com/@FyrbyAdditive" rel="nofollow noopener">club on Printables</a>, thank you!

Impossible Feathers

String Art

An occult style vase and a remix of our <a target="_blank" href="https://makerworld.com/en/models/45969#profileId-47777" rel="nofollow noopener">Twisted Pentagram Vase</a>. Great for celebrating Halloween or other family & religious occasions and the perfect receptacle for your already murdered flowers.&nbsp;If you would like to view the 3D model in colour in your browser and with optional AR, this is available <a target="_blank" href="https://beta.collaborate.shapr3d.com/v/D7P5hkF8PmMUF5Wj0Gv57" rel="nofollow noopener">directly at the Shapr3D viewer here</a> - please let me know if this link breaks as it was made in the Shapr3D parametric beta.&nbsp;Printing&nbsp;This is made to be printed in its normal orientation directly on the print bed with no supports. An 0.4 nozzle and a 0.2mm layer height worked well for me.&nbsp;The profile I have published here was used to produce the model in the above pictures with Extrudr NX-2 matte black and matte epic purple.&nbsp;Support&nbsp;If you like our work please consider <a target="_blank" href="https://www.printables.com/@FyrbyAdditive" rel="nofollow noopener">joining our club on Printables</a>!