FridayMarch

omegapoint

The third floating shelf in the moon series, Crescent Moon. No brims or supports needed. Use 4 mm screws to attach. May be scaled, but screws will have to be adjusted accordingly.

Crystal Shelf Moon Series, Crescent Moon

Shelves

Willi 3D

Create your BaBo organizer! A system created to store them all!&nbsp;Description:This are the BaBo modul feets. For a secure stand of the BaBo organizer. There are 2 versions, 4 mm and 20mm high.<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/568399/2023-09-08_tms98p27zihe.jpg"></figure>BaBo organizer is a stationary, very flexible system to store your tools, spare parts and even printing plates. The design is based on the iconic look of the Bambu Lab X1 printer. The entire system uses only 1 type of screw, M3x8 countersunk screws.&nbsp;Links:<ul><li><a target="_blank" href="https://makerworld.com/de/u/24485025/collections/12914" rel="nofollow noopener">BaBo collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/24485025/collections/666853" rel="nofollow noopener">BaBo duo collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/24485025/collections/666866" rel="nofollow noopener">BaBo inserts</a></li><li><a target="_blank" href="https://www.printables.com/@Willi/store" rel="nofollow noopener">Exclusive models, printables. (Credit card)</a></li><li><a target="_blank" href="https://than.gs/u/1578655?plans=true" rel="nofollow noopener">Exclusive models, thangs. (Paypal, Credit card)</a></li></ul>Printing:Layer height: 0.2Supports: NoBrim: NoMaterial: TPU&nbsp;Assembly:Screw the feet to the deepest module.The screws for connecting are already included in the modules.If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=WGL5LXN5EHEXN" rel="nofollow noopener">If you want to support my work bye me a coffee (PayPal).</a> Thanks!

[BaBo] modul feets

Zdeny3D

Print your Easter Bunny light as a decoration and brighten up your interior or exterior. Take the black frame and insert 8mm LED strips inside. Once you have assembled the led strip, you can complete the assembly with the green part. Be careful ! The entire assembly can be hung or placed on a plinth.&nbsp;YouTube link https://youtube.com/shorts/MfX7fpKT3is?si=Msdoe_2Bfq_B1Ri3

Easter Banny Silhouette LIGHT

Easter

prdak27

New York wall art.Famous statue of liberty.Optimized for P1/X1 bed size

New York wall art

braga3dprint

Introducing the 3D printable sign that playfully warns, "Warning! Do Not Read This Sign!" Designed to inject humor into any space, this sign defies curiosity and invites laughter. With its customizable design, you can easily 3D print this sign and enjoy the smiles and chuckles it brings as people try to resist the urge to read it. Embrace the funny side and add a touch of mischief to your surroundings with this hilarious sign.

Warning Do Not Read This Sign

Snarky

TheWallArtGuy

The Cat and the Moon Wall art.I printed this model in 5 parts, that I glued together.I used the powder (also satin is ok) sheet on my Mk3s, so the files are printed with the external face on the sheet (to have the nice texture visible).The p5 file needs support for the dove tail, doing so you will be able to join cat (p5) and tail (p4), then flip the print and the joint will be invisible.The photo is not the same of the printed model, I had to flip the moon because I forgot to flip the stl in the slicer before printing (the files are now corrected, so you don't have to do this)This is my tribute to our housecat Neve, that died of cancer recently.&nbsp;

The Cat and the Moon - wall art 2d

Martin Kozak

<h4>Note: I wasn't able to upload profile due to “Slicing timeout” in Maker World. But I provided 3mf file with all the settings for you, you can download it from RAW Model Files section. Please download it and open in it Bambu studio.</h4><h3>Space helmet for kids with lifting visor.</h3><ul><li>Inside diameter is 220 mm and bottom hole in bayonet is about 192 mm in diameter.</li><li>You can print it from colored filament, but I recommend to print it, sand it and the spray it with color. Shape is smooth and easy to sand.</li><li>Parts are meant to be glued together, see images for reference. Superglue works great.</li><li>For earpads, cut piece of foam and clamp it toghether between 3D printed parts using 2pcs M3x10 screws.</li></ul><h3>Transparent visor</h3><ul><li>For visor, use 0.5 mm transparent sheet and hot moulding (heat it up in the oven and stretch it over the mould. You can later apply smoke transparent color paint.</li></ul><h3>Other notes</h3><ul><li>Corrugated hose is not 3D printed. It's just some part I found somewhere.</li><li>Helmet, visor and bayonet are also split into several parts so they can be 3D printed on smaller printers (220 x 220) too. In such case, print provided pins - these will help you alignt parts together. Bambu can print them in one pieces.</li></ul>

Space helmet

Helmets

Brandido02

The rims and center ring are straight from Bambu's spool. And interchangeable with it. It is designed for Bambu's refill spools. But I have found that Elegoo spools also fit perfectly on it. Also Overture and Polymaker spools fit but are a bit loose, but they fit perfectly over the center rings of Bambu and Elegoo spools. So, I use them as spacers. Let me know if you try it with any other brands!I recommend PLA because it is a lot stiffer than PETG.&nbsp;03/24/23 - I've got multiple requests, so I uploaded a version 2.3 and 3.3 that remove the little notch on the inner ring. I left print profiles with versions 2.2 and 3.2 that still have the notch for Bambu spools. Note, I think the notch is important because it locks the cardboard inner ring so it doesn't spin free of the spool. &nbsp;12/14/23 - WOW 7K Downloads!!! Some folks asked for a filament scale, Soooo here is v2.2 and v3.2!!! The left side of both have a filament scale. The right side is unchanged.&nbsp;11/19/23 - Here is v2.1 and v3.1!!! The only difference is I added a 2mm hole in the Left side of the center ring for filament to be inserted when respooling. Though respooling isn't what I usually do. I actually have found that the cardboard center of other spools fit right over the center of this spool. Specifically, Elegoo fits perfectly. you just need to nip out a little notch. I have also done it with Overture and Polymaker. but their center rings are a little bigger and so are a bit loose. But, the center ring of an overture spool fits snugly right over the center ring of an Elegoo spool, which fits snugly over the center ring of this Bambu spool!&nbsp;10/19/23 - Wow! 3K downloads! Here is Version 3! it uses less filament and takes less time. But it may not be as strong. I have been testing it now for a couple weeks without any problems.&nbsp;9/29/23 - Uploaded v2. I completely remade the spool using Bambu's newest spool. The rims are completely smooth now.&nbsp;Here is a remix of Bambu's Filament spool but with hexagons to use far less filament without sacrificing strength.The rim filament holes are also angled so as not to introduce a sharp bend into the filament. Also, there are more of them around the rim.This is interchangeable with the original Bambu rims.&nbsp;Note: the spacing shim goes on the inside of the spool to lock the two halves together. Though I haven't needed it because they lock together pretty tight. But Bambu recommends it, so I included it.&nbsp;Why hexagons? Because hexagons are the best-agons!&nbsp;Notice: Print profiles NOT created by Brandido02 may contain outdated model versions or suboptimal slicer settings. Use at your own risk! I have no control over these third-party print profiles.

Bambu Reusable Hex Spool

Doesn't Work For Me

<h3>Create your BaBo organizer! A system created to store them all!</h3>&nbsp;<h4>Description:</h4>This is the BaBo drawer module 60.<figure class="image image_resized" style="width:48.16%;"><img src="https://makerworld.bblmw.com/makerworld/draft/568427/2023-10-22_8to6a8r5fqnp.jpg"></figure>&nbsp;The usable dimensions of the drawer are 240x210x60.The drawer has space for 8x7 inserts.The inserts have a grid of 30x30mm, this means a 1x2 insert has the dimensions 30x60mm.<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/568427/2023-10-22_jl2c2dqx1rzq.jpg"></figure>BaBo organizer is a stationary, very flexible system to store your tools, spare parts and even printing plates. The design is based on the iconic look of the Bambu Lab X1 printer. The entire system uses only 1 type of screw, M3x8 countersunk screws.&nbsp;Links:<ul><li><a target="_blank" href="https://makerworld.com/de/u/24485025/collections/12914" rel="nofollow noopener">BaBo collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/24485025/collections/666853" rel="nofollow noopener">BaBo duo collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/24485025/collections/666866" rel="nofollow noopener">BaBo inserts</a></li><li><a target="_blank" href="https://www.printables.com/@Willi/store" rel="nofollow noopener">Exclusive models, printables. (Credit card)</a></li><li><a target="_blank" href="https://than.gs/u/1578655?plans=true" rel="nofollow noopener">Exclusive models, thangs. (Paypal, Credit card)</a></li></ul><h4>Update:</h4>(31/10/23)<ul><li>improved connection between modules</li><li>easier to push back the drawer</li><li>print profile optimizations</li></ul>(26/01/24)<ul><li>design optimizations to prevent warping</li></ul><h4>Printing:</h4>Layer height: 0.2Supports: NoBrim: NoMaterial: all&nbsp;<h4>Assembly:</h4>Follow the instructions in the picture.<ul><li>printed parts</li><li>16 x M3x8 countersunk screws.</li></ul>If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=WGL5LXN5EHEXN" rel="nofollow noopener">If you want to support my work buy me a coffee (PayPal).</a> Thanks!&nbsp;

[BaBo] drawer module 60

BaBo

Clayton Merkle

-------------------- UPDATE 1/30/2024 --------------------I updated the sponge holder base to have a 4 degree angle on the top surface to help water runoff more easily and to prevent water from pooling up in the sponge holder. Based on feedback, I also slightly reduced the size of the plate so that it fits in the base a little more easily. It's still a nice snug fit, but a little easier to assemble now. These new models have the “_v2” suffix.___________________________________________________Simple kitchen sponge holder that drains into the sink. I printed both parts in PLA and they have held up well for over a year now, however PETg may be easier to clean, and is considered more “food safe.”Note that the image is of the original design. I have since beefed up the sponge holder plate to prevent it from warping over time.

Kitchen Sponge Holder

Household

printchallenge

This is a model of a character from the horror movie “hellraiser”, called pinhead.But instead of pins, you can use toothpicks :D ! The holes are 2.5mm in diameter, so use toothpicks of ±2mm in diameter.&nbsp;How to put it together is really simple:Pinhead Toothpick Bust #3dprinting <a target="_blank" href="https://youtube.com/shorts/B5lASq4HJKc?feature=share" rel="nofollow noopener">https://youtube.com/shorts/B5lASq4HJKc?feature=share</a> &nbsp;edit 31/10/23: corrected some holes that were missing due to blender mirror mistakes…edit 05/11/23: added the cape and eyes to the 3mf file (on a different plate)&nbsp;hope you enjoy!&nbsp;Print Challenge

Hellraiser Toothpick Bust

Movies, Music, & TV

TripleGWorkshop

I used a random number generator to help pick the heights so I couldn't fall into any patterns.Sized to print on Mini+<figure class="image image_resized" style="width:84.51%;"><img src="https://makerworld.bblmw.com/makerworld/draft/71463/2023-10-07_ceqsdzxmupzt.jpg"></figure><figure class="image image_resized" style="width:90.49%;"><img src="https://makerworld.bblmw.com/makerworld/draft/71463/2023-10-07_y0ddjczj2rf6.jpg"></figure><figure class="image image_resized" style="width:89.07%;"><img src="https://makerworld.bblmw.com/makerworld/draft/71463/2023-10-07_162uugf7v2lj.jpg"></figure>

▚ Cube Background Panels for Photography

Photo

Chester3D

&nbsp;IntroductionThe original model is designed for printers with a 250x250mm bed.&nbsp;If for any reason it doesn't fit on your bed, you can resize the model to the size you want from your slicer.&nbsp;It consists of two parts, the lamp body (body.3mf) and the rear cover (lid.3mf).Sometimes I include two lids, with and without a hole (choose the one you want, I recommend printing the Lid with hole whenever possible, to be able to remove the LED cable).&nbsp;If the back cover does not have a hole, you can easily make it from Bambu Studio, or from any other slicer you use.&nbsp;----&nbsp;You will need&nbsp;<ul><li>LED Strip: <a target="_blank" href="https://s.click.aliexpress.com/e/_DFOBtHT" rel="nofollow noopener">https://s.click.aliexpress.com/e/_DFOBtHT</a></li><li>- Glue gun or Tape</li></ul>Optional, but recommended:&nbsp;<ul><li>Aluminum tape: <a target="_blank" href="https://s.click.aliexpress.com/e/_DEPgqHd" rel="nofollow noopener">https://s.click.aliexpress.com/e/_DEPgqHd</a></li><li>- Textured PEI Sheet</li></ul>----&nbsp;Assembly instructions&nbsp;&nbsp;You can follow either of these two videos to assemble the lamp. It's very simple, you stick the LED strip inside and that's it. If you want, you can use aluminum tape to improve the lighting, although it is not necessary: &nbsp;<ul><li>Assembly instructions by braga3dprint: <a target="_blank" href="https://www.youtube.com/watch?v=QNsShLmXYh0" rel="nofollow noopener">https://www.youtube.com/watch?v=QNsShLmXYh0</a> (He makes very beautiful designs, you can leave him a follow and help him grow his channel!)</li><li>- Another assembly instructions: <a target="_blank" href="https://www.youtube.com/watch?v=nDUlBp7Mm1c----" rel="nofollow noopener">https://www.youtube.com/watch?v=nDUlBp7Mm1c----</a></li></ul>----&nbsp;Printing settings&nbsp;Following braga3dprint recommendations, you can start with these settings in Bambu Studio:<ul><li>Preferences (CTRL + P) → Activate developer settings → Quality → Advanced → First Layer Flow Ratio: 1.04</li><li>- Quality → Wall generator → Arachne</li><li>- Quality → Wall transitioning threshold angle → 50 degrees</li><li>- Strength → Advanced → Infill/wall overlap → 20%</li><li>- Quality → Advanced → Avoid crossing walls</li><li>- Increasing retraction / reducing temperature can help reducing wisps</li><li>- Order color printing from lightest to darkest color</li></ul>Important! Remember to remove the purge line at the start printing, otherwhise it will ruin the print.&nbsp;

Skellington LED Lamp Halloween

LED Light

R C 3D

This is a simple 8 color prism display with colored strings. Print from the print profile to ensure it prints right, otherwise just make sure your layer height is set to 0.3mm and 0.2mm for the first layer.

Prism String Art

Cool

Officina23

This “Light” version of Spool Filament Clip adapts perfectly to the external edge of Bambu Lab Spools. The back is flattened to avoid damage to the vacuum bags.Due to the thin profile, I recommend using a small brim when printing this clip to avoid possible adhesion problems.&nbsp; Warning:  before before downloading and printing SPAM profiles, please check that when ★ 𝐅𝐚𝐬𝐭 is written it is really faster and not 30% slower at printing. Also make sure it was actually printed by author and that the photo used is not only a copy of the print from the original profile!

Bambu Spool Filament Clip - Basic

Clips, Fasteners, Brackets

LordBoos

Graveyard Mansion - HueForge.<h4>Printing instructions:</h4>Filament swaps ONLY, no MMU or AMS required, but AMS makes it much easier.Use Original HueForge profile to get the intended look, my models are very sensitive to print settings because of color blending between layers. Every setting and filament changes for AMS are carefully prepared and fine-tuned in the Original HueForge print profile, feel free to change colors, but I recommend not to adjust other settings. If you want to experiment with your own settings or non-original print profiles, for best look print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm.You can use same filaments as I did, or you can experiment with your own.Don't forget to upload a make!<h4>Filaments Used:</h4><ul><li>PLA BambuLab Basic Black Transmission Distance: 0.6</li><li>PLA BambuLab Basic Blue Gray Transmission Distance: 3</li><li>PLA BambuLab Basic Jade White Transmission Distance: 4</li></ul><h4>Swap Instructions:</h4><ul><li>Start with Black</li><li>At layer #4 (0.36mm) swap to Blue Gray</li><li>At layer #16 (0.84mm) swap to Jade White for the rest.</li></ul>

Graveyard Mansion (Filament Painting) - HueForge

Filament Painting

Bambu Lab

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013717/design/2023-09-19_9f3e533f94456.jpg"></figure>This LED lamp project offers two types of 3D-printed lamps. Type A features a hollowed-out and angular design, while Type B showcases textured and wavy patterns. To achieve the best lighting and shadow effects while maintaining a balance between translucency and light guidance, we have carefully selected suitable LED light sources and recommend using Bambu PLA Basic Jade White filament for this project.&nbsp;Recommended filaments: Bambu PLA Basic Jade White<a target="_blank" href="https://store.bambulab.com/products/pla-basic-filament?variant=40820833517683" rel="nofollow noopener">https://store.bambulab.com/products/pla-basic-filament?variant=40820833517683</a>Hardware Kit: LED Lamp Kit-001<a target="_blank" href="http://store.bambulab.com/products/led-lamp-kit-001" rel="nofollow noopener">http://store.bambulab.com/products/led-lamp-kit-001</a>&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures.&nbsp;Follow the Assembly Guide below step by step to print and assemble your build. Refer to the Design Guide for further design and quality enhancement.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013717/design/2023-09-15_31832bf687dbb.png"></figure>

LED Lamp 001

Bambu

Duane777

A small 50x90mm sanding block. Cut the paper to size 110x90mm. The screw hole in the base can be used if you print in ABS as it doesn't have the layer adhesion of PLA and PETG. The screw I used is a 25mm drywall screw. Supports are needed for the handle.

Small Sanding block

Woodwork

JamesThePrinter

A snowflake in a flat pack style. Print twice and slide together. Held together with a friction fit. It can stand on it's own or it can be hung by a string.&nbsp;Check out the rest of my Christmas models <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/69417" rel="nofollow noopener">here</a>!&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>

Snowflake - Flat Pack Style

Christmas

Diggle

Small little soldering finder tool designed onto a gridfinity 1x1 plate. Hold onto those wires with ease!

Soldering Fingers (Gridfinity)

Tools

Gridfinity

Ludo Timp

Z-axis cap for P1P, X1 and X1C  |  Loose fit!&nbsp;For all the people who want to give feedback on the fact that this cap is too loose of a fit:The reason of the loose fit that rotates easily is that not in any case you want a z-axis dust cover to grip, snap or sit to tight at the top op the z-axis screw rod. Just the slightest resistance of a cap against the z-axis screw rod can result in layer defects. So I advice you to go for the safe option, in stead of the tight option. And if you don't want any risk whatsoever, don't use a cap at all. Not even mine that has a loose fit.I use them now for over a year and never had any z-axis defects, pop off's or other issues.&nbsp;Features:<ul><li>Shields the metal z-axis end-bearing from dust and filament debris.</li><li>Material: Bambu Lab Black ABS.</li><li>Chamfered bottom and top.</li><li>Diameter: 19mm.</li><li>Height: 2mm.</li><li>Includes 1,5mm inside indent for z-axis metal protrusion.</li><li>To be placed on top of the z-axis.</li><li>Sightly smaller then the z-axis hole so the cap can rotate freely if needed.</li><li>Printed on Bambu Lab PEI textured plate to match the plastic z-axis mount matte finish a bit.</li><li>Easy removal: just press your finger a few seconds on the cap and lift it off.</li></ul>Disclaimer: This design is free to download including the accompanied files. By downloading this design, you agree to the following:<ul><li>as with all designs that you didn’t make and test yourself, mine may work or won’t for you,</li><li>I can’t give any guarantees for the print you make, the way you do it and which tools u use,</li><li>no rights can be derived and I can’t be held liable.</li></ul>If you have questions or suggestions, please contact me by message. In case you need an adjustment or re-design, I’ll perform those upon payment.  If you like what I made and want to tip me for it, please do so at your discretion at <a target="_blank" href="https://ko-fi.com/ludotimp" rel="nofollow noopener">Ko-Fi</a>. Have fun and enjoy being creative!

Z-axis cap P1P, X1, X1C  |  Loose fit!

BODY3D

Fidget Flower

Kids

agepbiz

"making of.." <figure class="media"><div data-oembed-url="https://youtu.be/1gzcMpzTbfI"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/1gzcMpzTbfI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;I wanted to make some halloween decoration using flexible filament so I made this little fella in a speed 3d modeling session. I hope you enjoy this small project&nbsp;<h3>Commercial license</h3>Do you want to sell prints of this model? You can purchase commercial licensing for this model by <a target="_blank" href="https://www.printables.com/@agepbiz#join:144" rel="nofollow noopener">joining the Commercial license tier in my club</a>&nbsp;Subscribe or follow me on Instagram: <a target="_blank" href="https://www.instagram.com/agepbiz/" rel="nofollow noopener">https://www.instagram.com/agepbiz/</a> Twitter: <a target="_blank" href="https://twitter.com/agepbiz" rel="nofollow noopener">https://twitter.com/agepbiz</a> YouTube: <a target="_blank" href="https://www.youtube.com/agepbiz" rel="nofollow noopener">https://www.youtube.com/agepbiz</a>&nbsp;<h3>Print instructions</h3>Unassociated tags: black widow, halloween decoration<h3>Category: Toys & Games Print Settings</h3>Printer: Mingda D2Rafts: NoSupports: NoResolution: 0.1mmInfill: 20<h3>Filament: Fillamentum TPU 92A Traffic Black Post-Printing</h3>

Black Widow TPU Spider

Halloween

clockspring3d

No supports required - prints flat-side down for the main body, and detail-side-up for the lid :) Happy printing!

Citrus Box

Food

Jorge Rui

<h3>Introduction</h3>This model has been specially developed to take full advantage of the printing bed of most printers, which is approximately 200x200 or a little more.but it can also be used for anything else, with saving writing material, drawing etc. <ul><li>This gray module you see is specific to 100x150mm index-cards (4x6 inches). To get an idea of the dimensions, it allows you to put a little more than 700 cards of 180g/m^2</li></ul><figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/42808/2023-08-21_xznmnldpwl14.jpg"></figure>Of course, in the case of a modular system it is possible to accumulate as many modules as you need, that is, the system will grow according to your needs.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/42808/2023-08-21_1adne8yera7t.jpg"></figure>You can use colors for each of the groups, thus organizing your workflow.<h4><img src="https://makerworld.bblmw.com/makerworld/draft/42808/2023-08-21_oa9zzg75e1an.jpg"> </h4>And a new 76,2x127,0mm (3x5 inches) that you can find in “3x5 module.3mf” in files.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/42808/2023-09-26_cfcdbdafdbe5d.jpg"></figure><h4>Printing</h4>These cards are the second largest, and so as you can see the boxes are not small either (like I've said in the beginning, they use almost all the print bed area (PRUSA MK series). You will have to wait a few hours before you can use your slip-box, but you will get it and it look fantastic. If you want other dimensions send a message or change this to your needs.It is however a remarkably simple impression, without supports, without anything special. The infill is up to you, the default 15% is ok.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/42808/2023-08-21_phzp7i2ry0gj.png"></figure><h2>Change log</h2>(26-09-2023) - Added some tabs, maybe they help. Only 2 layer thickness. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/42808/2023-09-26_3d743f3b1a109.jpg"></figure><ul><li>Added a 3x5 box to files.</li></ul><h4>Support the designer:</h4>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener">buymeacoffee </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&no_recurring=0&currency_code=EUR" rel="nofollow noopener">paypal, </a>or even better, join “My Club” here in printables.com, that will be greatly appreciated.&nbsp;

Zettelkasten Index boxes (Slip Box)

Storage Containers

This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener">buymeacoffee </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&amp;no_recurring=0&amp;currency_code=EUR" rel="nofollow noopener">paypal, </a>that will be greatly appreciated.&nbsp;<h3>Introduction</h3>In the first use of the AMS of bamboo, I found that the humidity level was very high, so I put all the bags of silica I had inside it, and try to solve the problem. After having dried all my material in an oven at 60ºC, yes, I know it is dangerous, but the truth is that it worked, and put it back on the AMS.The silica bags remained on the AMS, giving a horrible look to a piece designed with so much care in mind...You can see my first solution <a target="_blank" href="https://www.reddit.com/r/BambuLab/comments/153qohm/my_dream_team_the_x1c_combo_is_the_new_upgrade/?utm_source=share&amp;utm_medium=ios_app&amp;utm_name=ioscss&amp;utm_content=1&amp;utm_term=1" rel="nofollow noopener">here</a>, not good at all. Checked where I could &#34;hide&#34; the silica, but none of the ideas satisfied me....Eventually, the extra desiccant will no longer be needed. But in the meantime, the best place will be inside the spools. In this case it can accompany the spool when I put it in outside the AMS, when no longer need it.This design was good and elegant: <a target="_blank" href="https://www.printables.com/model/65922-silica-gel-spool-container," rel="nofollow noopener">https://www.printables.com/model/65922-silica-gel-spool-container,</a>I analyzed it and, re-created it from the ground-up to meet my construction and tolerance requirements. I share my work with this great community.&nbsp;This is an excelente complement for the <a target="_blank" href="https://amzn.to/3UZiEJO" rel="nofollow noopener">Sunlu S4 filament dryer </a><img class="image_resized" style="width: 27.93%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013098/design/2024-05-26_1ebe389b9fef5.png"><h3>Note</h3>After some requests I&#39;ve made one with the mini thermometer/digital hygrometer embedded in the lid. For now is only available for members of my club in <a target="_blank" href="https://www.printables.com/model/598697-desiccant-container-for-spool-with-thermometer-hyg" rel="nofollow noopener">printables.com</a>.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013098/design/2023-09-30_508077f273c79.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013098/design/2023-09-30_a3ec384a6589b.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013098/design/2023-09-30_f2377218e8c38.jpg"></figure></td></tr></tbody></table></figure><h3>Change log:</h3><ul><li>(20-07-2023) - Added an updated version, that I think it will be easy to print, removed the fillet on the Cap, and added a conic fillet on the bottom on the container (last image).</li><li>(09-09-2023) - Complete reconstruction of the model. The openings are now narrower for better bridging. the logo is embedded on the lid. File pre-configured for bambu studio</li><li>(29-09-2023) - Added step files.</li></ul>

Desiccant container for Spool

Nakozen

The classic and favoured fighter-bomber starfighter to be used by the Rebel Fleet against the Galactic Empire, the Y-Wing is a sturdy work-horse that has been used in countless conflicts for across the galaxy.This is a total reworking of one of my very oldest kits which has been showing its age for some time now. Featuring surface details, fully-ish 3D nacelles, and a more true-to-form silhouette! Original Y-Wing Kit: <a target="_blank" href="https://www.printables.com/model/143146-y-wing-kit-card" rel="nofollow noopener">https://www.printables.com/model/143146-y-wing-kit-card</a> X-Wing Kit: <a target="_blank" href="https://www.printables.com/model/143177-x-wing-kit-card-redux" rel="nofollow noopener">https://www.printables.com/model/143177-x-wing-kit-card-redux</a> B-Wing Kit: <a target="_blank" href="https://www.printables.com/model/143174-b-wing-kit-card" rel="nofollow noopener">https://www.printables.com/model/143174-b-wing-kit-card</a>------------------------------------------------------------For those uninterested in the card format, there is a frameless variant included! Be sure to line the nacelle parts up correctly using the arrow guides!&nbsp;Print at 0.2mm layer height, there really is no benefit from printing at a higher resolution and it could affect the fit. The model parts are 1.8mm high, which is not divisible by 0.16 for example!Be sure to print with 100% infill for it to hang straight as the weight distribution can be sensitive! Makes greatly appreciated, always glad to see them! Happy Printing!------------------------------------------------------------Interested in selling? All files are marked as non-commercial along with any remixes created from them.If you are interested in selling physical prints of my models anywhere, be it online or offline, you can obtain a sales license when subscribed to Tier 3 of my Ko-Fi memberships! <a target="_blank" href="https://ko-fi.com/nakozen/tiers" rel="nofollow noopener">https://ko-fi.com/nakozen/tiers</a>

Y-Wing Kit Card REDUX

Star Wars

Space: the final frontier. These are the voyages of the Starship Enterprise. Its five-year mission: to explore strange new worlds. To seek out new life and new civilizations. To boldly go where no man has gone before!First of the upcoming series of new sci-fi kits is of course the NCC-1701 Enterprise from Star Trek the Original Series.<a target="_blank" href="https://www.thingiverse.com/thing:4601489" rel="nofollow noopener">Find TNG's NCC-1701-D Enterprise kit here!</a>Two versions of the kit are included, one with a hanging loop and another without, alongside the individual part files. UPDATE 12/12/22: Version 2 has been added along with a tighter variant (labelled ‘Ti’)!------------------------------------------------------------Print at 0.2mm layer height, there really is no benefit from printing at a higher resolution and it could affect the fit. The model parts are 1.8mm high, which is not divisible by 0.16 for example!Be sure to print with 100% infill for it to hang straight as the weight distribution can be sensitive! Makes greatly appreciated, always glad to see them! Happy Printing!------------------------------------------------------------Interested in selling? All files are marked as non-commercial along with any remixes created from them.If you are interested in selling physical prints of my models anywhere, be it online or offline, you can obtain a sales license when subscribed to Tier 3 of my Ko-Fi memberships! <a target="_blank" href="https://ko-fi.com/nakozen/tiers" rel="nofollow noopener">https://ko-fi.com/nakozen/tiers</a>Want to show me you love me? Buy me a "coffee"...! <a target="_blank" href="https://ko-fi.com/nakozen" rel="nofollow noopener">https://ko-fi.com/nakozen</a>

NCC-1701 Enterprise Kit Card

Star Trek

JonathanLevi

I wanted a toilet paper roll that matched the design of our door knobs, so I designed this. It's an almost perfect match, except I didn't manage to get the outer angle to round a little bit, still don't know how to do that. &nbsp;I deliberately designed it without holes for screws, for aesthetics, but it has a very nice and large base, which leaves plenty of room for industrial double sided tape or glue. I'm using Mammoth tape and it's sticking just fine. &nbsp;Update: Mine broke b/c of the thin base, so I thickened the base and reinforced it a bit. Two versions now available.