Wash Basin Strainer V2 Flip-up Drain Filter Bathroom Sink Companion

Optimization Notes:

• The recently uploaded Washbasin Filter (V1) received considerable praise and support from users, but also presented some shortcomings, such as relatively small filter apertures prone to blockage and a low anti-roll cylindrical surface. Therefore, the V2 version primarily optimizes the filter aperture size, incorporates a limiting surface, and increases the height of the cylindrical surface. Consequently, the washbasin filter V2 boasts enhanced filtration and stability, providing superior flap fixation and improved aesthetics.

Version Notes:

• V2-1: Both bottom and side apertures enlarged for improved flow;
• V2-2: Only bottom aperture enlarged for enhanced overall filtration;
• Rapid Print: Print time approximately 28 minutes, material consumption approximately 3.8g (including supports, easily removable);
• Reduced height, facilitating portability;
• Reusable.
• Defaults to 35mm drain aperture.

Usage Recommendations:

• It is recommended to remove the filter during brushing to avoid unnecessary cleaning;
• For stubborn hair or lint, place the filter in a small container of water, agitate gently, and then flush it away in a toilet or lavatory (larger drain diameter).
• Avoid using water exceeding 60°C, as this may soften and damage the structure, leading to pipe blockages.

Thank you for your valuable suggestions and feedback. We encourage you to download the new version; we are confident it will offer an improved user experience. Please feel free to leave comments if you encounter any issues!