CW32 USB Charging Tester VA METER

This is a USB charging detector based on the CW32L010F8U6 chip

Development board official documentation https://dwi41yhz703.feishu.cn/docx/A3hCd6gBkoi15LxE8NWcy3UknRg

This enclosure is designed using a 0.96" TFT LCD screen (st7735s—avoid purchasing incompatible screen versions with different drivers) Assembly is straightforward Using the official mass production tool, CW-Programmer V1.97, with a CH340 programmer, you can easily flash the firmware The programming software and project HEX file are included in the uploaded documentation

————————————————————————————————————————————————————————————————

24-11-27 Added Hatsune Miku cat paw version casing

24-11-20 Updated documentation package and firmware files with the latest official version which fixes the power calculation mode, and a community-contributed optimized version by Suifeng, which adds a polyline chart mode for power and current, and a screen rotation function via long press. You may choose to flash either version.

24-11-15 Added a printing configuration   Added an XINYUAN logo to the upper cover Slightly enlarged the male connector opening Added a positioning stop to the protective cover

Notes:

• Supplement on Burning Wiring

• Follow the official CW-Programmer burning instructions.
• The enclosure is secured usingM1.7*8 countersunk flat-head self-tapping screws If screws are unavailable, use filament inserted into the screw holes for simple fixation (insert filament, trim excess, and secure with the tip of wire cutters)
• The burning software and project HEX files are packaged in the uploaded document; download, rename the extension to zip, and unzip.