Alien Hello Kitty
Print Profile(1)
Description
Alien Hello Kitty
Boost Me (for free)
if you liked my model and want to support me
tips & info:
- Please use my profile as they are tuned with the correct support needed for a proper print.
- i have tuned the profile to use as little support as possible so its much easier to remove and keeping a quality print.
- Print more than 1 just incase one fails you still have the other one =) it only adds about 10-15% extra time for each one you add
- use any color you like.
- Scale it up as big as you like.
- Simple way to gain some quality without adding lot of time is to change layer height as it only adds about 5-10% extra time.
- Please use pliers to remove the supports from main body.
- Be careful when removing the support from the head antennas.
Assembly is straight forward
the parts can be pressed fit but i suggest using glue to connect the head to body, so it doesn't fall off and break the antennas.
filament length used (65-70mm) for the UFOs
( Please keep in mind that all printers and filaments are different. they can vary in tolerance and shrinkage)
Coloring:
- use the “Fill” tool along with "Smart fill angle" slider to get best results when coloring the model.
Filaments used:
Bambu Green
Bambu Mistletoe Green
Bambu Matte Black
Elegoo Sakura Pink
Elegoo Silk silver
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (17)