M48 Cyclone Push Dagger Toy Knife 玩具刀带鞘

Please be sure to comply with your local laws and do not use the model for inappropriate purposes.This is a cosplay prop.

Thank you to everyone who provided me with the photos.

No assembly instructions can be released at this time. Could not pass review.

United Cutlery is an interesting company that often has some novel designs. M48 Cyclone Dagger .blade with an open twisted design giving you multiple razor-sharp edges. I scaled down the M48 and used it as a toy through 3D printing.

The blade and handle need to be glued together. Try to use lower layer height and speed to get better strength. The tip of the knife can be slowed down to 50% for better quality (especially with PETG).

United Cutlery is an interesting company that often has some novel designs. M48 Cyclone Dagger blade features an open twisted design, providing multiple razor-sharp edges. I scaled down the M48 and used it as a toy through 3D printing.

The blade and handle need to be glued together. Try to use lower layer height and speed to get better strength. The tip of the knife can be slowed down to 50% for better quality (especially with PETG).

PS: Microtech Jagdkommando Knife Toy with sheath

https://makerworld.com/zh/models/488465#profileId-401449

Please be sure to comply with your local laws and do not use the model for inappropriate purposes.

Under the new reward mechanism, please "Boost Me" more, give me five-star praise, and welcome everyone to share and show off their finished works, so that I can get more points. Your support is my biggest motivation to continue designing more models.

Reminder:

• Different filaments may cause the parts to be too loose or too tight, and may also make some supports difficult to remove.
• The position of the model printing takes into account strength and appearance (for example: vertical surfaces have better fineness and better representation of patterns and text; horizontal printing axes sacrifice accuracy but have better strength).
• Please keep the printing plate clean. All models are confirmed to be printable. It's not my fault if it turns into spaghetti.
• It is recommended that you equip yourself with a heat gun. Slightly heating the parts can solve many minor problems and can also compensate for minor part tolerances.