Search models, users, collections, and posts
BambuLab AMS Desiccant Tray w/ OEM lid
IP Report
Print Profile(10)
0.2mm layer, 2 walls, 20% infill
Designer
46 min
1 plate
0.28mm layer, 2 walls, 15% infill
1.4 h
1 plate
2pcs - 0.25mm layer, 2 walls, 15% infill
1.4 h
1 plate
GRID BOTTOM FOR DRYING 0.24mm layer, 2 walls, 15% infill
32 min
1 plate
Click to see more
Open in Bambu Studio
Boost
6686
18504
5869
3.6 k
36.9 k
30.2 k
Released
Description
I made a desiccant tray that snaps with the original desiccant cover for the Bambu Lab AMS.
I simply used PLA and .2mm standard settings for printing.
This should fit just perfect in your ams if it's the same as me. I bought it early 2024.
To install the original cover on the desiccant tray, start by joining the part closest to you by first lining up the pimples with the holes on the cover, and then snap it with the tab on the back.
The tray is placed in the AMS just like the cover alone would be placed; inserting the 2 front tabs in place, and snapping the back tab in place.
Note
The original cover holds most desiccant beads, BUT, smaller beads can get through the holes, so don't overfill and turn upside down.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
Comment & Rating (5869)