Honkai Star Rail Clockie Model

update:

A new ball joint has been added that does not require screws or supports, allowing it to be integrally formed, making it more convenient and aesthetically pleasing. I designed it to be relatively tight for damping effect, you can print the second plate and use pliers to loosen it.

The new ball joint, which does not require screws and supports, can be integrally formed, making it more convenient and aesthetically pleasing. I designed it to be relatively tight for damping effect, you can print the second plate and use pliers to loosen it.

——————————————

Instructions

This is a movable 3D printed model of the Clockie from Honkai Star Rail, featuring limbs with ball joints and interchangeable faces. Although it looks similar to the official model, all parts are independently modeled, referencing game screenshots.

Reference Source: mihoyo
Modeling: bilibili@粮亦丰
Requirements: When reprinting or using, be sure to indicate the source. Small-scale production and sale must also state the source (Makerworld link and author) to maintain its open-source nature.

File contents: Clock frame, interchangeable faces, hat, limbs, shoes, hands, bow tie, clock hands, clasp, base parts, installation tool (for pressing ball joints)

Installation Guide

Parts required in addition to the printed parts: 3*12 screws, 3*5 screws, multiple 6mm diameter 3mm high strong magnets, 50*50*1mm square iron sheet (base), 4*100mm stainless steel shaft (base)
 

(1) The hat and faces are designed with magnetic suction. The nose can be pulled to change faces. Comes with a base, which is the same as the previously released Lordly Trashcan. The clock hands can easily be clipped into the groove at the bottom of the nose.
(2) The body of the model is designed to be very easy to assemble. Simply press the ball joints of the limbs into the grooves set in the front half, and secure them with 4 x M3*12 screws on the back. The bow tie should be pre-screwed on.
(3) The clasp needs to be fully tightened with M3*12 screws from the small end, and then used to secure the neck and head.
(4) For the multi-color printing version, splitting the project files reasonably can achieve better efficiency in restoring the image. Without AMS, multi-color printing can also be achieved by specifying layer pauses, especially for the faces.
(5) Installation can be done by referring to the internal structure diagram.

If you have any questions, please leave a comment or find me on bilibili https://space.bilibili.com/17022346.

English: (translated by AI)

This is the movable 3D print model of the Clock Boy, with four limbs containing ball joints and interchangeable faces.

Although it looks similar to the official model, all parts are independently modeled, referencing game screenshots.

Reference Source: hoyoverse

Modeling: bilibili@粮亦丰

Requirements: When reprinting or using, be sure to indicate the source.

File contents: Clock frame, interchangeable face, hat, limbs, shoes, hands, bow tie, clock hands, clasp, base parts, installation tool (for pressing ball joints)

Installation Guide

In addition to the printed parts, the following parts are required: m3*12 screws, m3*5 screws, multiple 6mm diameter 3mm high strong magnets, 50*50*1mm square iron piece (base), 4*100mm stainless steel shaft (base)

(1) The hat and faces are designed with magnetic suction. Comes with a base, which is the same as the previously released Lordly Trashcan. The clock hands can easily be clipped into the groove at the bottom of the nose.

(2) The body of the model is designed to be very easy to assemble. Simply press the ball joints of the limbs into the grooves set in the front half, and secure them with 4 x M3*12 screws on the back.

(3) The clasp needs to be fully tightened with M3*12 screws from the small end, and then used to secure the neck and head.

(4) For the multi-color printing version, splitting the project files reasonably can achieve better efficiency in restoring the image. Without AMS, multi-color printing can also be achieved by specifying layer pauses, especially for the faces.

(5) Installation can be done by referring to the internal structure diagram.