IKEA Skadis 24x20 IKEA Pegboard 24x20

This pegboard is adapted from the 20*20 pegboard. https://makerworld.com/zh/models/208330#profileId-228370

The pegboard connectors and support feet have been uploaded. For more details, please jump to →→→ https://makerworld.com/zh/models/227562#profileId-245176

Due to the change in printing area, the connector holes of the pegboard have changed, so they are not compatible with the connector hole positions of the previous 20x20 pegboard.

The thickness of the pegboard: 5mm, which is convenient for adapting to the accessories of IKEA pegboards on the market.

The screw hole diameter of the pegboard: 4.6mm

※ Two boards can be assembled together, and you can freely add the pegboards in the middle to splice into a larger area pegboard.

※ The main load-bearing of the pegboard depends on the different fixing methods. Here I recommend the following three fixing methods: fixing by drilling holes in the wall; fixing with glue without nails; fixing with hookless screws. The ranking from largest to smallest in terms of load-bearing capacity is: fixing by drilling holes in the wall > fixing with glue without nails > fixing with hookless screws.