Toolbox middle plate for WORX WX242 screwdriver

Introduction:

• This is a replacement for the middle tray of the Worx WX242 cordless impact wrench tool case
• It is more compact to accommodate more bits. Long bits/extension rods that are used infrequently are placed on the back, or module E can be chosen
• In addition to holding the cordless impact wrench, it includes space for 1 customizable and replaceable module, which can be changed according to your needs

Module	Holds	Image
Module A	25 6.35mm x 25mm bits, 10mm spacing (easy to pick up) 20 4mm x 35mm bits, 7mm spacing (slightly difficult to pick up, but compact storage)
Module G	34 6.35mm x 25mm bits, 10mm spacing (easy to pick up) Added rainbow identification strips Does not rely on AMS
Module B	Nanchi screwdriver / Maister screwdriver 3-jaw chuck 24 4mm x 45mm bits, 7mm spacing
Module C	Nanchi screwdriver / Maister screwdriver 36 4mm x 45mm bits, 10mm spacing
Module C1	Essentially the same as Module C, with 9 optional screwdriver bit identification marks added Due to limited space, the 3D printed screwdriver bit shape identification marks in the middle are unclear. For those needing rainbow identification marks, it is recommended to print C2 directly Does not rely on AMS for multi-color printing
Module C2	Essentially the same as Module C1, removed screwdriver bit shape marks (unclear in 3D print), only kept rainbow color marks and bolded them Does not rely on AMS for multi-color printing
Module D	Nanchi screwdriver / Maister screwdriver 1 magnetizer measuring 35x19x16mm (included with Maister set) 30 4mm x 45mm bits, 8mm spacing
Module E	Nanchi screwdriver / Maister screwdriver 1 magnetizer measuring 35x19x16mm (included with Maister set) 20 4mm x 45mm bits, 8mm spacing 2 6.35mm x 50mm long bits, placed at an angle 1 6.35mm x 60mm extension rod, placed at an angle Those who wish to place the original 2 long bits and 1 extension rod at the front can choose this module
Module F	A miniature box for small parts like tiny screws and washers Occupies the space of the Maister magnetizer Compatible with Modules D/E

Other:

Replacement for the middle tray of the Worx WX106 rotary tool case

Worx tool case compatible with WX242 and WX106

Update Records:

• Updated 20260322:
  • Updated Module C2, fine-tuned rainbow identification marks
  • Updated Module G, adjusted capacity, added rainbow identification marks
  • Fine-tuned the wrench position on the basic middle tray, now it can be stored directly with the original adapter
• Updated 20250426:
  • Updated Module C1, added screwdriver bit identification marks for C1
• Updated 20250329:
  • Updated Module F, a small box for tiny parts like small screws, occupies the space of the Maister magnetizer
• Updated 20250108:
  • Updated Module E, those who wish to place the original 2 long bits and 1 extension rod at the front can choose this module
• Updated 20241127:
  • Updated Module D, holds a 35x19x16mm magnetizer
• Updated 20241010:
  • V2 version released
  • The card slots under the screwdriver in V1 were prone to breaking, now redesigned as a drawer style, easier to print
• Updated 20240624:
  • This middle tray holds the WX242 cordless impact wrench, see the main image. The WX242 is the second generation with an 8-speed mechanical adjustment ring (190mmxΦ37.5mm), which is slightly larger, tested and fits successfully
  • The WX240 is the first generation without a mechanical adjustment ring (190mmxΦ37.5mm), which is slightly smaller. Its shape is similar and size slightly smaller, theoretically it should also fit, but it has not been tested