Mini Reversi
Print Profile(1)
Description
Assembly toy, 38 tiny parts to assemble, suitable for children to develop patience
Caution: not for toddlers, contains small parts
Board-free method supports direct printing without AMS
My material is Bambu Lab wood series board, PLA black and white pieces. Choosing "piece thickness 0.3-radius 4.88mm" is more suitable, everyone can start printing with this
Just select one plate of pieces. If the tolerance is too loose or too tight, you can print different plates in sequence and reassemble
After the small triangular holes are tested for stability, the filament ends are hot-melt sealed. The large hole is for threading a keychain
Assembly: Assemble according to the exploded view below
Notes: This is the smallest usable design achievable with a 0.4 nozzle. If three piece faces interlock and cannot be inserted all the way, you can use a 1.8-2mm drill bit and simply turn it half a turn
If you have any questions, leave a comment
This series also has a 15x15 Gobang version and a 19x19 Go version. All are miniature with their own pieces. Additionally, there's a version with a standard Go board and larger pieces, with a piece spacing of 25mm
License
This work is licensed under a Standard Digital File License - Print Only (SDFL-PPO). You shall not download, export, copy, adapt, create derivative works, share, sub-license, sell, rent, host, transfer, or distribute all or any part of this work, whether in digital or physical form (including - but not limited to - extraction of model data, and hosting on other digital platforms). The work may not be used for commercial purposes without permission in any way whatsoever in which you charge money, provide commercial printing services, or obtain monetary compensation or other financial benefits. This work may only be accessed and printed through MakerWorld's official platform and officially supported printing services.
Comment & Rating (0)