Turntable Feeder Box, Turntable Filament Box, Sealed Filament Box [No Glue or Hardware Needed]

Sealed Rotary Filament Feeder Box, modified from my previous sealed filament box

A turntable and a Teflon port were added, allowing filament to be drawn directly from the box to feed the printer

The size was slightly increased to ensure smooth rotation without rubbing the spool

Two print profiles are provided, one for each filament exit direction (forward and reverse)

For smoother rotation, the small parts on plate three do not have skirts. Please ensure the build plate is clean and free of debris before printing, to prevent small parts from detaching and causing print failure. (It is best to clean the build plate with dish soap)

Smooth rotation can be achieved using pure PETG 3D printing, with no issues for printer use

For an even smoother effect, you can replace the printed axle pins with M2x12 metal pins

Due to the added filament exit port, the sealing effectiveness is influenced by the port's seal. If used for temporary filament storage, you can plug the exit port

At the exit port, use a segment of Teflon tubing, threading it in perfectly, making sure it goes all the way through

For long-term filament storage, you can print my sealed filament box