E14 Lamp Adapter

## E14 Socket Adapter for LED Lamp Kit 001

This model was designed entirely from scratch in Fusion 360 using reverse engineering. It adapts the original base of the **Bambu Lab LED Lamp Kit 001** to fit standard **E14** lightbulbs (Small Edison Screw - SES).

### 💡 Why use this adapter?
* **More uniform light:** By using a standard E14 bulb, the light source sits perfectly centered inside the lampshade, achieving much smoother and more even lighting.
 

* **Cheap and easy to find:** If you don't have the official Bambu Lab kit, you can easily buy the E14 socket, cable, switch, and plug at any local hardware store. Many stores even sell pre-assembled cables with the switch and plug already connected so you don't have to do any wiring yourself.

### 🛠️ Recommended Print Settings:
 

* **Layer height:** 0.2 mm
* **Wall loops:** 2 or 3 (Enough to provide excellent structural strength to the smooth walls).
* **Infill:** 15% - 20% (Gyroid pattern recommended).
* **Supports:** **YES, they are required** (It is recommended to enable normal or "tree" supports to properly hold the cable window bridge or any overhanging areas).