Apache 3800 Insert

This is for an insert cover for the Harbor Freight Apache 3800.  I made a battery box and wanted to have a cover.  I had to cut in in Orca Slicer and printed on a Creality Ender 3 V3 Plus. 

I've included my cover. 

I also included the brackets that I used some serious tough double side tape. 

I used PETG-CF with no supports. 

For those who might want to customize it.  Just drop it into Claude, Gemini, or ChatGPT with your specification. For example if you want a 29mm hole at 30mm from the bottom and evenly space. You would put that into the request “Add two 29mm holes 30mm from the bottom and evenly spaced”.  

BOM

Brass inserts to secure the lid to the rails: https://a.co/d/0bp79JDP

On/Off switch with LED: https://a.co/d/0bp79JDP

Fan covers: https://a.co/d/09Oh5tzK

Fans: https://a.co/d/07VfFJNf

Circuit Breaker: https://a.co/d/07VfFJNf

Connectors: https://a.co/d/0drji49l https://a.co/d/0hZdySVv 

Power divider: https://a.co/d/0fyTkqjk

MPPT: https://a.co/d/0fyTkqjk *not this exact model

Solar Panels: https://a.co/d/0dAh1DLZ

Gang panel: https://a.co/d/02dEXWoG didn't use this, just the sockets.  If I went with a smaller MPPT this would have been used. 

Anderson Power Pole connector: https://a.co/d/03udPBoc

Battery Monitor shunt: https://a.co/d/0h3OVRN2

Battery: https://a.co/d/0fN7Nr44