Assemblable Mini Missile
Print Profile(3)
Description
This is an assembly small bomb that requires no hardware. The three-section design is easy to assemble. It can be played with as an EDC, spinning continuously
A bottom loop was also made. It can be used as a bag charm or a keychain. Without the bottom loop, it becomes a small ornament
The only thing to note is that the small decorative piece on the main body needs to be glued on. Of course, you can choose not to install this small decorative piece. It does not affect playability
If you want it to spin well, I personally recommend printing with PLA. Print the screw and wrench. If you want it to spin well, don't overtighten it
If the filament tolerance is large, it is recommended to reduce the screw part by 0.2mm. Currently the pre-plated is for X and Z axes, do not reduce the Y axis.
My matte PLA black is fine. The silk one is slightly difficult to screw on but not impossible. It can be screwed on with a little more force. It's just a tolerance issue between filaments.
For multicolor, it is strongly recommended to print on separate plates. Printing on a single plate takes too long.
Boost Me (for free)
Your support is my greatest motivation
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)