Apple Watch Charging Stand
Boost
269
418
158
Print Profile(5)
0.16mm layer, 4 walls, 20% infill
Designer
1.2 h
1 plate
A1 mini, 0.2mm layer, 4 walls, 20% infill
1.1 h
1 plate
0.2mm layer, 4 walls, 20% infill
48 min
1 plate
0.16mm layer, 4 walls, 10% infill - Optimized for A1 mini
1.2 h
1 plate
Click to see more
Boost
269
418
158
14
1.1 k
986
Released
Description
This is a stand to hold your Apple Watch Charger. Works with all versions of the Watch charger (USB-A and newer USB-C) and all versions so far of the Watch including the Ultra. It may not work with all cases.
Putting some rubber feet on the bottom will help with sliding.
Printing Tips:
- Best in Matte PLA
- 4 Perimeters with 20% Gyroid Infill
- CHECK YOUR FIT: It is meant to fit the Watch charger with a slight press fit so you may need to scale it up or down depending on your settings and filament. I've scaled the model from the first version posted.
Comment & Rating (158)
All
Print Profile
0.16mm layer, 4 walls, 10% infill - Optimized for A1 mini
works great, no issues at all
0
Reply
Print Profile
0.16mm layer, 4 walls, 20% infill
tut was es soll und hält die uhr top
0
Reply
Print Profile
0.16mm layer, 4 walls, 10% infill - Optimized for A1 mini
it’s printed quiet good however I needed to use force to put charger in place
0
Reply
Print Profile
A1 mini, 0.2mm layer, 4 walls, 20% infill
great design
0
Reply
Print Profile
0.16mm layer, 4 walls, 20% infill
Worked well. The top of the circle could probably have done with a support, but I was able to squeeze the charger in.
0
Reply
Boosted
Print Profile
0.16mm layer, 4 walls, 20% infill
Great little stand, the fit is perfect
Printed in Sunlu PLA Marble
0
Reply
Print Profile
A1 mini, 0.2mm layer, 4 walls, 20% infill
Top
0
Reply
Boosted
Print Profile
0.16mm layer, 4 walls, 20% infill
thanks for sharing!
0
Reply
Print Profile
0.16mm layer, 4 walls, 20% infill
perfect fit
0
Reply
Print Profile
A1 mini, 0.2mm layer, 4 walls, 20% infill
I thought it was too small for the charger, but it’s actually perfect, excellent print.
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (1)
© 2024 MakerWorld