Joker Hueforge
Print Profile(1)
Description
Another one with 8 colours and 2 pauses enabled so that you can change filaments in AMS. Have fun and post pics of your prints!
Project: Joker.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.12mm
The Model is 130.81x196.43mm in size
You may print at higher layer heights below the Base Thickness of 0.56mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mm
#080a0d PLA BambuLab Basic Black Transmission Distance: 0.3
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#00358e PLA BambuLab Basic Blue Transmission Distance: 4
#6f5034 PLA BambuLab Basic Cocoa Brown Transmission Distance: 0.4
#ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5
#e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4.3
This print uses 8 unique filaments
Swap Instructions:
Start with BambuLab Basic Black
At layer #17 (0.76mm) swap to BambuLab Basic Blue Gray
At layer #19 (0.84mm) swap to BambuLab Basic Blue
At layer #20 (0.88mm) swap to BambuLab Basic Cocoa Brown
At layer #23 (1mm) swap to BambuLab Basic Pumpkin Orange
At layer #25 (1.08mm) swap to BambuLab Basic Beige
At layer #31 (1.32mm) swap to BambuLab Basic Jade White
At layer #45 (1.88mm) swap to BambuLab Basic Red for the rest.
Boost Me (for free)
Remember to boost prints you enjoy!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)