shieldmaiden

hi this is my first go of hue forge  please rate it but be kind.

i used all bambulab filament  and if anyone can give me advice to be better at hue forge i would be most  grateful  thank you.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 92.09x187.09mm in size

You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 2.4mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #8b9398 PLA bambulab basic gray  Transmission Distance: 5
    #0056b8 PLA BambuLab Basic Cobalt Blue  Transmission Distance: 1.2
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to gray
    At layer #8 (0.72mm) swap to Cobalt Blue
    At layer #9 (0.8mm) swap to Jade White for the rest.