AmazonBasicsScrewdriver + bit storage

This is a model of an AmazonBasics Screwdriver Bit Holder. It is designed to hold the 9 bits that come with the screwdriver set, plus the extension bit holder. The model includes a hole in the bottom to fit a magnetic USB-C swivel end, allowing it to act as a magnetic charging socket.

Build Materials:
- Amazon Basics by SKIL 4V Cordless Stick Screwdriver with 10-Piece Bit Set and USB Cable
- Any of the generic USB-C magnetic swivel adpaters should work, the one is used had a tile of USB C Magnetic Adapter PD 240W (2-Pack), 9PIN USB C 90 Degree Adapter/C Right Angle
- 5x20mm Neodymium Magnets

Assembly Notes:
- The magnet is press-fit into the bottom of each bit holder.
- The USB-C magnetic adapter is hot-glued into the bottom of the bit holder. The slot allows the cable to exit either side for easy routing.
- The screw holes are sized to fit standard drywall screws flush to the surface.

Printing Recommendations:
Material: PLA
Layer height: 0.2mm
Infill: 15%
Supports: Recommended for the bridge over the bottom slot for a cleaner result.