PIKACHU
Print Profile(1)
Description
Project: PIKACHU.hfp
Employ a 100% infill density, utilizing a layer height of 0.08 mm and a foundational layer of 0.24 mm.
The model's dimensions are 218.69 x 377.43 mm.
Printing may be conducted with layer heights exceeding the minimal depth of 0.24 mm.
The maximal depth is 2 mm, while the actual depth measures 2.1 mm.
Filament Specification:
GST BLACK PLA (Transmission distance: 0.8)
Bambu Lab Basic Red PLA (Transmission distance: 4)
GST GOLD PLA (Transmission distance: 2)
SUNLU WHITE PLA (Transmission distance: 1.4)
This particular print necessitates the use of four distinct filament types.
Sequential Filament Application Guidelines:
Initiate printing with BLACK.
Upon reaching layer 6 (0.64 mm), transition to RED.
At layer 14 (1.28 mm), switch to GOLD.
For layer 19 (1.68 mm) and all subsequent layers, utilize WHITE.
ENGLISH
Project: PIKACHU.hfp
Print with 100% infill, a 0.08 mm layer height, and a 0.24 mm base layer.
The model measures 218.69 x 377.43 mm.
You can print with layer heights greater than the minimum depth of 0.24 mm.
The maximum depth is 2 mm, and the actual depth is 2.1 mm.
Filaments used:
GST BLACK PLA (Transmission distance: 0.8)
BambuLab Basic Red PLA (Transmission distance: 4)
GST GOLD PLA (Transmission distance: 2)
SUNLU WHITE PLA (Transmission distance: 1.4)
This print uses 4 unique filaments.
Swapping instructions:
Start with BLACK.
On layer 6 (0.64 mm), change to RED.
On layer 14 (1.28 mm), change to GOLD.
On layer 19 (1.68 mm), change to WHITE for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)