Large Modular Shelf

I was looking for a suitable large and modular design shelf to display my prints, but could not find anything online.

The shelf is 500mm wide and 200mm deep (divided into a two part shelf).  The shelves are modular and the rows stack together with small clips/cams. can run 1 up to 4, maybe even more rows if desired.

The end handle contains two counter sunk screw holes for wall mounting. if mounting on a wall you can print a 2 handles for the top and bottom of the shelfs, or i have also made feet so the shelf can be a standalone unit (i havent tried the feet but they should work ok).

Each row uses less than 450grams of filament. I printed mine in PLA as its quite stiff and my room does not get too hot, if printing in more flexible filament i recommend glueing the clips in place which should give it more strength.

I havent weight tested the shelf to destruction but i found its plenty sturdy for displaying 3d printed items.

use two clips to interlock the shelves together, push one of the clips towards the front of the shelf for better alignment, i found glue not necessary due to the print orientation, the layer lines tend to interlock keeping the clips in place.