Universal Controller Hanger

This is a universal controller hanger that mounts under a desk or shelf. It features a slotted pass through to accommodate a USB cable for charging. I mounted this by using 2 command (picture frame mounting) strips  placed in the recessed rectangles on top of the hanger. Version 4 has screw holes should that be your preferred method of attachment. 

Some users have uploaded a make showing fitment with other controller types. Xbox One, Steam, Stadia and Switch Pro controllers fit in this mount. Please see the photos of the makes that were added!

Please let me know if you have any specific requests for this model, post your makes, and also check out my other for a more snug and elegant fit!

Version 3 UPDATE: 
I added a slot in the front of the hanger to accommodate a headset cable pass through. I also increased the depth on the command strip spots to allow better fitment.  

Version 3 requires support when printed on its side. 

Version 4 UPDATE:

-Updated with screw version with pass through for screw driver. Attachment holes are sized for #8 wood screws.

-I added a version w/o the aux slot and version w/o aux or charging slot. On the version with charging slot I also narrowed up the charging cable pass through to help with stability. Printing with additional wall layers will help with this also. 

Version 5 UPDATE:

I added a hanger for Headphones. There is one model with the aux cable pass through and one without. Disclaimer: I haven't printed this one (V5) yet so if there are any improvements to be made, or a version with screw holes is needed please let me know in the comments.