Interpretation of Starry Night by Van Gogh - Hueforge - Filament Painting - Free 3D Print Model

Search models, users, collections, and posts

Protoprints

Art>2D Art

IP Report

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

MULTI-AMS 0.08mm layer, 1 walls, 100% infill

Designer

6.5 h

1 plate

4.9(23)

ONE AMS 0.08mm layer, 1 walls, 100% infill

Designer

6.5 h

1 plate

5.0(18)

EXPERIMENTAL - LESS ORANGE 0.08mm layer, 1 walls, 100% infill

Designer

4.7 h

1 plate

5.0(11)

Frame & Pause, 1 OR MULTI AMS, 0.08mm layer, 1 walls,100%INF

7 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

522

1042

812

227

Released

Description

An interpretation of Starry Night by Van Gogh made for filament painting.

I tried hueforging an image of the original oil on canvas as well, but the outcome didnt look as good due to the nature of the brushstrokes.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
Generic Black, Blue, Light Blue, Orange, Yellow, White PLA+ filaments.

Swap Instructions:
Start with Black
At layer #3 (0.32mm) swap to Blue
At layer #8 (0.72mm) swap to Light Blue
At layer #13 (1.12mm) swap to Orange
At layer #19 (1.6mm) swap to Yellow
At layer #31 (2.56mm) swap to White for the rest.

Two print profiles have been provided as 6 colors are used:

for use with 2 or more AMS units
for use with a single AMS unit

The only difference is that the single AMS profile has been set to swap back to slots 1 and slot 2 after printing from slot 4. A pause has been added before the end of the 4th color (orange) to allow for slots 1 and 2 to be changed from Black and Blue to Yellow and White respectively.

In summary the print order will be Slot 1 → Slot 2 → Slot 3 → Slot 4 → Slot 1 → Slot 2.

UPDATE: An updated experimental print profile has been uploaded with less orange and yellow. Try only if your orange/yellow filaments have a high opacity, causing the picture to look too warm.

Protip: Reducing nozzle temps slightly (5 - 10 degrees C) may help prevent stringing on detailed prints like this that require lots of retractions.

Happy printing! Share your makes!

Note: Bambu Studio shows Error 920 : Non-manifold edges when slicing. This is normal for Hueforge prints. Please ignore and print away :)

Comment & Rating (76)

@h1ckman

Boosted

Print Profile

MULTI-AMS 0.08mm layer, 1 walls, 100% infill

Love it. Seems like it needs more black and blue or maybe less orange. It is great though. Thanks.

The profile uploader has replied

@Protoprints

Looking good! The orangey look is probably due to a difference in the opacity of your filament and mine (I used some cheap locally available stuff 😂). What filament are you using? I can try to create another profile for you if presets are available in the Hueforge software.

@h1ckman

Boosted

Replying to @Protoprints :

burnt orange pla+ from iiidmax

@Protoprints

Replying to @h1ckman :

what about the yellow and white?

@Crumbelino

Boosted

Print Profile

MULTI-AMS 0.08mm layer, 1 walls, 100% infill

Love it!

@Frickjen

I love it! Which colors did you use?

@Crumbelino

Boosted

Replying to @Frickjen :

Thanks! I just checked, these should be the ones used: SUNLU/JAYO PLA Matte Black SUNLU/JAYO PLA Matte Blue Bambu PLA Matte Ice Blue Bambu PLA Matte Mandarin Orange SUNLU/JAYO PLA+2.0 Pure Yellow Bambu PLA Matte Ivory White

(Edited)

@Frickjen

Replying to @Crumbelino :

Thank you so much!

(Edited)

@RaisingTheBARDe

Print Profile

MULTI-AMS 0.08mm layer, 1 walls, 100% infill

what a beautiful print! thank you for sharing!

@zensqrl

Print Profile

EXPERIMENTAL - LESS ORANGE 0.08mm layer, 1 walls, 100% infill

Printed the “less orange” version and it turned out beautifully, thanks for sharing! Used: Bambu Matte PLA Black Bambu Matte PLA Blue Bambu Matte PLA Ice Blue Bambu Basic PLA Orange Overture PLA Yellow Bambu Matte PLA Ivory White

@JuanitoBanana01

Boosted

Print Profile

ONE AMS 0.08mm layer, 1 walls, 100% infill

just beautiful 😍

@user_983221507

I love the colors you have chosen. Would you share the specific colors?

@h1ckman

Boosted

Print Profile

EXPERIMENTAL - LESS ORANGE 0.08mm layer, 1 walls, 100% infill

printed both options. one at work and the less orange one at home. below is the less orange one and bottom one in double photo.

@mxctt_80ita

Print Profile

MULTI-AMS 0.08mm layer, 1 walls, 100% infill

I have added a 2mm frame around it, with a depth of 4mm, so you don't have to print a separate one. My colors are: SUNLU PLA+ BLACK BAMBULAB PLA Matte Blue SUNLU SILK BLUE BAMBULAB PLA Matte Mandarin Orange SUNLU Silk Light Gold SUNLU PLA+ White

Show original

@jun1000

Print Profile

EXPERIMENTAL - LESS ORANGE 0.08mm layer, 1 walls, 100% infill

It prints nicely~ The thickness of the black base part is not thick, so it bends slightly

Show original

@Isaac.4121

Print Profile

ONE AMS 0.08mm layer, 1 walls, 100% infill

Used a lighter orange. 👍👍👍

@impresionanti3D

I like it!

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.