simple hueforge
Print Profile(1)
Description
Boost Me (for free)
if u like it, boost it (rocket)
Print at 100% infill with a layer height of 0.12mm with a base layer of 0.2mm
The Model is 114.46x160mm in size
You may print at higher layer heights below the Min Depth of 0.44mm
The Max Depth is 2.2mm and the Actual Depth is 2.4mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 4.2
This print uses 3 unique filaments
Swap Instructions:
Start with Charcoal
At layer #7 (0.92mm) swap to Gray
Border Only Colors from here until the end.
At layer #13 (1.64mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)