Emil

Nimly Code Pro cover

Japani inspired paper towel holder

Printed in PETG so I changed to 2 walls and lower gyroid infill, but I had no issues with clearance. I think this should only be printed on an enclosed printer. I need however deduct one star as the part "_9" is oriented wrong. For some reason the part does not have it's long sides to the print bed, and printing this "in air" is prone to errors. It should be changed to make contact with the printbed, as shown before/after in the image I have attached. 

RocketRonny

iPad Air 1 & 2 Frame, wall or desk

0.13mm layer, 4 walls, 25% infill

siulun

Philips Oneblade pro 360 stand and storage

0.2mm layer, 2 walls, 15% infill

printed in petg, holds together well. would be nice if the wheels did not require screws 

SFYoung

Chain Chassis . Coupled Cars . Tiny Train System

A1 Mini, 6 Cars Long

Decent way to save some filament, only a tad worse results than petg support 

KYZ Design

Starter Set - KYZ Train Tracks

Added Thin Support Rail - 0.2mm layer, 2 walls, 10% infill

Earn this badge when visit MakerWorld more than 20 days in last 30days UTC time

MakerWorld Guardian