A model of Goliath, one of the Cranes at the Belfast Dock where the Titanic was built. I was very impressed with these cranes on a recent visit, so decided I would try to build a model one. I got a tech drawing of Harland an Wolff website and scaled it from there, so my one is not exact, but very close. I printed it in PLA from Sunlu (Cherry Red, Sunny Yellow) and (Bambu Black Matt). Let me kow how it goes for you if you print one

I wanted some simple boxes to store all the odd bits and pieces I use with my A1. Ive CAD'ed a simple box base and a fitting lid, than can then contain one of 3 inserts ive also CAD'ed to hold various stuff. Ive made three of these, printed in PETG and I used 10 or 15% infill. The small “Cylinders” on the lid have a 1% taper so they have a tighter fit and stop the lid falling off easily, and a small cutout so you can get the lid off with a finger nail.

My project of parts to help me make timelapse videos from my A1 using a slotted opto to trigger a camera on a raspberry pi.