{"content":[{"type":"text","text":"Miniaute Hamster figure"}]}

RC maniak

{"content":[{"type":"text","text":"facemask skull"}]}

{"content":[{"type":"text","text":"Bear Voronoi \n\n"}]}

{"content":[{"type":"text","text":"Mega screw and Nut"}]}

{"content":[{"type":"text","text":"Linkings"}]}

Recommendations for printing with PLA: nozzle 0.2mm, layer height 0.05.
The ring is optimized for SLA printing, but a handy person can also make it with PLA filament.
The default ring size is 23mm diameter, it is possible to increase the scale

{"content":[{"type":"text","text":"Solder paste and flux Dispenser"}]}

Flexible indestructible stand for mobile phone, tablet.
Print: PLA, 2-3 perimeters, 30% infill

{"content":[{"type":"text","text":"Shopping Bag Handle"}]}

{"content":[{"type":"text","text":"Linkling"}]}

{"content":[{"type":"text","text":"Infinity_Cube"}]}

{"content":[{"type":"text","text":"Bear-Voronoi"}]}

{"content":[{"type":"text","text":"Screw and Nut"}]}

{"content":[{"type":"text","text":"Wraith Knife"}]}

{"content":[{"type":"text","text":"facemask-skull-fixed"}]}

{"content":[{"type":"text","text":"Gear Fidget Spinner\nBoost Me (for free)"}]}

gopro camera holder with cover for RC model Traxxas X-Maxx. I recommend printing from more durable materials (ASA, PC, PCTG, CPE) with a minimum of 10 perimeters and a 25% infill.

{"content":[{"type":"text","text":"Pliers"}]}

{"content":[{"type":"text","text":"V8 engine kit"}]}