Printed nicely! I ran out of filament right near the end, ended up giving it a nice accent color on accident because I didn't have anymore black pla 😂

Printed really well and super easy to install! I've got more printing for the other side of my desk.

Yo this thing is awesome! My darts fit in nicely and the closure is super clever. I only had TPU (high speed, so it's a bit more rigid) and it works really well. I had 2 thoughts after using it if you're open to it. Some sort of groove and lip on the lid/case so that it can't slide around. And I was thinking it'd be nice to have a little hoop on the lid so that it can't get separated from the case. Maybe one of the lid hooks could be like an elongated hole but that might make it hard to insert the tpu/tpe filament. Either way I like this thing a lot!

Fit right onto the back of the standing skaddis board I have for controllers! Perfect

Fits perfect! I did notice the unit heats up a lot when using this and the air quickly becomes warm. Maybe using it on the highest setting isn't the best idea. My guess is that it can't pass enough air out the nozzle on the max setting. Just something to look out for.

Perfect little desktop cleaner for me. Will make another one in petg to help with the shedding hopefully of PLA strands.

Turned out great! Took about 30 minutes for it to download to the printer which is the longest I've ever seen but it printed so well.

I scaled it up to 110% and it printed really well! I was inspired to get some gradient filament based on the pics but this was filament split down the middle with 2 colors instead of a fade. It came out really nice! This one is like a Grey and orange but ends up making it look kinda stone/clay colored. I got some very slight stringing on a few of the overhanging designs that jut out, but that's probably this new filament.

Great print! Controller fits perfectly but the only issue I had was the hooks didn't go into the body. I just snapped off the the springy parts of the bracket and glued it to the body.

Really enjoy thus! The updated version fits my flights way better. And it looks very nice!

Awesome print profile! I had to modify it to fit my vent size and changed the holes for the magnets but it's exactly what I needed! Simple and effective

It's so cute! And taller than I thought (which is good!)

This thing is cool! Took some work to get the underframe put in, but it feels super secure. Did the wheels in Grey tpu and my kid loves it. Awesome print.

Amazing print! A little too small for my board (winmau diamond plus) but I made it work. I also edited the magnet clips to fit magnets that I had (10mm x 2mm). Mind if I upload it in case others happen to have the same size? Otherwise I love the number design! My goal is to not hit the ring, but I think it'll hold up to a few missed doubles. Random gripe... Why do board manufacturers put writing where some of the numbers go?! The original number ring was white and it was so hard to read. I cut up a black note card to make 4 and 16 numbers readable.

Really awesome print overall! I had a few issues with a couple pieces missing. I made another extra plate in bambu studio with the pieces needed (see Pic). There is a chance I just missed something, so maybe that's on me. I also had some adhesion issues with a lot of the + rails, but I just used a little glue and then they were fine. However I had to use a deburring tool on all of them for assembly, as they were too tight most of the time. The 3-hole blue pieces should be open in the middle. These do not have the same support material that the other pieces do. Either add in a negative space in software or use a drill bit. I used a drill bit. In the instructions it can be hard to tell what length + rail is being used, but I learned they match the # of holes in the other pieces so if it calls for a 5 rail, line it up with something with 5 holes to make sure you have the right length. Overall this was still a super fun project! A little too hard for my kid so I did most of the work.

I ended up printing the button side flat and with supports and it came out pretty great. I'll be printing the c stick Keychain when I can get a stickbox unsoldered off an old board. These are so cool!

Super fun! Kid loves it.

This thing is so cool! I only had a copper color so it isn't very gold, but it still looks awesome.

Printed 2... First was with petg and my settings are way off... It was stringy and gunky. Printed again in PLA and it looks crisp and amazing! Using this as a wireless Android Auto dongle so this is perfect for jostling around in my center console.

Belissimo ragazzo! I have printed so many of these and the V4 with the metal clasp. I need to take pics and upload them. I use really big flights and they would get stuck in the door sometimes, so I make them a bit larger. All I had to change was the magnet size for the closure.