Maruya K3 Post Protective Cover

Temperature and humidity meter magnetic case

SHT45 temperature and humidity sensor 60-degree tilt mount

0.16mm layer, 3 walls, 25% infill

0.16mm layer, 3 walls, 25% infill

0.16mm layer, 3 walls, 25% infill

0.2mm layer, 2 walls, 15% infill

0.16mm layer, 3 walls, 25% infill

0.16mm layer height fine print, magnets glued

0.16mm layer height fine print, magnet interference fit

Glue-on version, hole size 6.2*2.1mm

Interference fit version, 5.95*2.1mm opening

4.2mm magnet holes, glued, beginner-friendly

The magnet holes have an interference fit, which is quite tight and suitable for experienced users

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill

1/4 inch 5/16 inch 3/8 inch three-in-one pipe clamp