Very tight fit, so it had to be held down for removal. And it's too low for a holder with a long single nozzle

Works well, fits "strong" in the hole, so doesn't get lost.

works very well

very well printed (with PETG), but the steam valve is too hot and the hole got round after one day. So better some filament that is uncritical at high temperatures.

Without an attached rubber the whole machine floats on the surface 😉

With Sunlu PLA Marble Shadow Storm (as requested by my daughter 😉)

Worked very well, two prints in use. 😊

Mostly perfect, mostly because the front stands on the thermostat, not on the stand itself.

using Sunlu PLA glow orange two legs (3rd pair) broke and had to be fixed with glue.

perfect print (eSUN matte PLA light khaki)

fits as expected 😉

very nice, using eSUN PLA matte light khaki, now trying a bit enlarged model

works perfectly

Printed with Sunlu High Speed PLA Marble "Oreo Marble" looks really good.

Perfect, I'll was requested to print another one for the dog owners family

Made a standard and a large one, now the dog owner requested another standard sized for having the whole dog family black mother black father, two brown puppies and nine black puppies. For the puppies I used a different nice model.

made 2 brown and 9 black matching the born puppies. Only removal of support is tricky.

works well, I used PETG for the print and a 1,5l bottle

used PETG, but the first print got a small defect when I opened the water tap. ;-) Maybe as I used it fresh out of my P1S...

fits perfect in the tubes of handlebars