cool model. printed fine with no issues. would love to see an updated version that incorporates bearings to make spinning on the base smoother, but it’s still good as is.

cool model! wanted something a bit larger, so I scaled it up to 600% and let the printers do their thing. this is just a dry fit to see how everything went together, and so far so good. he stands right around the 3 ft mark. there’s a lot of post processing work to do, but I can’t wait to get this guy prepped and painted. thanks again for the model!

great model, goes together very well. the only issues I had were the right front door failed and needed to be repositioned on the plate to get a successful print, and when screwing the interior floor to the floor frame the 2.5x16 screws were a touch long. I trimmed the screws with a small hacksaw, and the assembled interior floor assembly fit perfect. i highly recommend printing this model, you won’t be disappointed.

increased print size so that model would be around 1/12 scale of actual size. after assembly it came out at around 16” tall and about 40” long. Had to print a couple of the ribs twice, as the first time a few fell over. it is mentioned in the description that some parts may have to be printed separately, but overall it is a great print. assembly instructions were pretty straightforward, and model went together pretty easily.

sweet model! zero issues when printing, and all parts fit together very well. good for marvel legends and gi-joe classified series figures when printed at 110%.

printed great in polymaker gold abs. 0.16 layer height, 5 walls and 10% infill. printed with no issues.

took a little cut off the back so it would sit flat on the bed, and had no issues printing. ran out of filament on the first one, then printed another out of dual coloured silk.