Got the newer, taller 33cl EU soda cans? 🥤 I've updated my Can Holder specifically for these "Sleek" cans (~58mm diameter)! ✅ Fits standard 330ml tall cans (Cola, Pepsi, etc.) ✅ Easy to print with the included .3mf profile ✅ Shorter handles (for 4 or 6 cans) are now in the STL section! Check it out, and free Boosts are always highly appreciated! 🚀

🚀 New Release: Industrial Jet Engine Pen Holder! ✈️ Upgrade your desk with this turbine-inspired organizer! ✅ Customizable Name Plate: Easily add your own text in Bambu Studio (uploaded as .3mf). ✅ Ergonomic: Tilts 10° for easy access. ✅ Factory Finish: Name plate prints face-down for a perfect textured look. Matches perfectly with my SFF PC Case! 🖥️ Download on MakerWorld now 👇

"Upgrade your desk setup with my new Geometric Vertical SFF Case! 🖥️✨ Designed for a clean, minimalist footprint without sacrificing power. Despite being only ~11.6L, it fits a full triple-fan GPU and the Thermalright AXP120-X67 cooler. The geometric mesh isn't just for looks—it provides amazing airflow. Printed in PETG-CF for a premium matte finish. This is an advanced build for serious makers. Files are ready—let’s see your builds! 👇

Just published my Geometric SFF Tower! 🖥️💨 It’s a vertical Mini-ITX case designed for maximum airflow and premium aesthetics. Despite the small footprint (~11.6L), it fits a 3-fan GPU and the massive Thermalright AXP120-X67 cooler. Recommended print in PETG-CF for a matte, durable finish. This is an advanced build using heat-set inserts – perfect for those wanting a unique, high-performance PC. Check out the files and happy printing! 👇

Napkin Stand - Dala Horse 🇸🇪 is LIVE! Bring a piece of Swedish tradition to your table this winter! This easy-to-print Dala Horse napkin holder is the perfect festive touch for your kitchen or dining room.

A practical wall mount designed for the Fiido C21 and C22 e-bike charger. This holder keeps your charger neatly organized and off the floor, with an integrated slot on the right side for the charging connector — perfect for storing it safely when not in use. The mount attaches easily to the wall using two screws, keeping your charging area tidy and convenient. For best results, print it in a heat-resistant material such as PETG, ASA, or ABS, since the charger can get slightly warm during use.

New V4 Cutting Disc for Luba 1 & 2! Now with 5 blades for cleaner cuts and improved efficiency. Bosch compatible, easy to print, and designed to reduce energy use so your mower runs longer before charging. Uses Ruthex M5x9.5 inserts + 3 longer screws (M4x18–20mm).

New V4 Cutting Disc for Luba 1 & 2! Redesigned for 4 blades with a slightly larger diameter, reducing gaps between blades for cleaner cuts. Now using M5 threaded inserts (Ruthex M5x9.5 recommended). Still Bosch blade compatible, lightweight, and easy to print. Improved efficiency = longer mowing time before charging!

Made a simple hub removal tool for the Mammotion Luba 1 & 2. Mounts with the same screws as the blade disc and works with a standard 10 mm socket. Makes it easy to clean behind the hub—highly recommended to avoid damaging the axle seal! Prints fast, no supports needed, and even doubles as a scraper for cleaning underneath. 🛠️🌿

Just released a new version of my 6-blade cutting discs for Mammotion Luba! This one’s slightly smaller in diameter to fit longer Bosch Indego-style blades. Still lightweight, easy to print, and uses M4 inserts to keep blades loosely mounted—helps prevent grass buildup. Check it out if you're experimenting with aftermarket blades!

New version of my 6-blade cutting discs for Luba – now lighter, stronger, and much easier to print! Fits Luba 1 & 2. Prints in just over 2 hours per disc, no special setup needed. Works great with PETG, ABS, or ASA. Ruthex M4x8.1 inserts and M4 screws (18–20mm length) recommended.

Just dropped custom wheel covers for the Mammotion Luba! 🛞✨ Two versions included (front + rear), or just print 4x front-style for newer models. No supports needed – perfect for multi-color prints! Screw info: M4x25mm (3 per side) for front + newer rears. Older rear covers use stock screws. Give your Luba a fresh look! 😎🌿

Just uploaded a front bumper cover for the Mammotion Luba! Thicker (2.5 mm) for extra protection, easy to print, and designed to slide apart safely if caught on obstacles. Only minimal supports needed. Check it out!

Tired of your EV charging cable lying on the ground? 🧲 I designed this compact, support-free wall holder to keep things tidy! Easy to print and install – just 3 screws. Use PETG, ASA, or ABS for outdoor use, or PLA for indoors. Clean, simple, and super practical. Check it out! ⚡🔌

Upgraded cutting discs for Luba! ⚙️ These fit 6 blades (vs. the original 4) and raise the cutting height by 10mm. Want to keep the original height? Just pair them with my 10mm spacers. 🛠️ Needs 6 Ruthex M4x8.1 inserts per disc. Best printed with AMS or filament swap using HIPS/PLA as support interface. More blades = cleaner cuts! 🌿

Need a lower cut from your Luba? 🟢 I designed simple 10mm spacers that reduce the cutting height. Easy to print (no supports!), and just swap in some ~16mm M4 screws. Best printed in ABS, PETG, or ASA for outdoor use. Check it out and give your lawn that clean, short look! 🌱

New wheel covers for the Mammotion Luba now on Makerworld! 🛞 Two versions: front and rear (only front needed for newer models). Easy print – no supports needed! Designed for multi-color printing (AMS recommended). Printed in ABS, but PLA/PETG/ASA should work too. Note: Front covers (and rear on newer models) need M4x25mm screws (3 per side).

🏁 Give your Luba the F1 treatment! 🏎️ I've designed a decorative rear wing spoiler to turn your lawn robot into a backyard racing legend. Easy to print, glue together, and mount with double-sided tape. No added speed—just style! Check it out on my profile and make your mower the fastest-looking one on the block! 🌱🔥

✨ New upload! A collection of bold, motivational quote designs made just for teachers. Perfect for classroom walls, desks, or gifts to your favorite educator. 90x90mm, easy to print, no supports needed. Let's inspire learning — one layer at a time! 📚🖨️ #TeacherLife #3DPrint

🚤✨ Introducing the Benchy-Visby Remix! ✨🚤 Ever wondered what happens when the world’s favorite 3D printed boat gets a stealthy Swedish twist? 🥷⚓ Meet the Benchy-Visby Hybrid—a sleek, ninja-like model that blends nautical charm with Scandinavian engineering genius. Perfect for those looking to print something bold, fun, and stealthy! 🕶️🌊 Check it out and set sail on MakerWorld! 🚀