Another SabreDesign perfect model and profile. Printed in X1C in Bambu Bone White Matte PLA. Thanks so much!

Superb! I have been using eds_3d_shop models in my AMS for years, they print and work great! When I picked up some AMS 2 Pros, eds_3d_shop was my first stop for these dessicant containers. This new rear dry box for the AMS is brilliant! Using Gyroid infill as a means of ventilation is brilliant! Printed in PETG Translucent and PETG HF, the model and profile are perfect! I am currently printing all of the front boxes and will share my thoughts when those are done. Thanks for sharing and enjoy the Boost!

This might be the best X1C upgrade yet! Reaching around, behind, through, and between PTFE tubes to power up or down my X1C printers has always been a hassle. My X1C printers are surrounded by racks of AMSs and getting to the power switch was nothing short of a contortionist maneuver! I have contemplated re-locating the surge protector that the printers are plugged into to gain easier access to power, but I often still have one printer running so I never pulled the trigger on that idea. When I saw this model on MakerWorld, I downloaded it and instantly printed it and am happy to say with stellar success. The model and print profile are top notch - it is a great, intuitive design that solves an everyday problem and works flawlessly every time. It was such a hassle to get to the power switch that I would often just leave the printers on to avoid turning my elbow into a universal joint. Well done! Thanks for sharing and enjoy the Boost!

Great design and print profile - works perfectly for a laptop or tablet. Thanks for sharing! Enjoy the BOOST! I also needed a "double" version to hold 2 devices - I mirrored the base; works great. Remixes not allowed so I could not upload the profile.