Search models, users, collections, and posts
WrapperTrapper
IP Report
Print Profile(2)
![0.2mm layer, 2 walls, 15% infill [PLA]](https://makerworld.bblmw.com/makerworld/model/USb01c677f153ff/186781747/instance/2024-12-26_20fdb8c326f29.jpg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
0.2mm layer, 2 walls, 15% infill [PLA]
Designer
2 h
3 plates
![0.2mm layer, 2 walls, 15% infill - [PETG]](https://makerworld.bblmw.com/makerworld/model/USb01c677f153ff/186749341/instance/2024-12-26_636dc7f759be2.jpg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
0.2mm layer, 2 walls, 15% infill - [PETG]
Designer
2.7 h
3 plates
Open in Bambu Studio
Boost
5
16
1
1
17
12
Released
Description
Neded a simple “lock” to keep the wrapping paper from getting loose and folded.
Most I found was not what I needed, so I made one.
Prints and works great with both PETG and PLA
3 Different sizes, 30mm 35mm and 40mm
35mm Is what I use.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
There are no related models yet
Comment & Rating (1)