Pikachu

With so many Pokemon options I decided to go a little more abstract than normal with this Patreon members request.

If you want to make a request and get FREE *Patreon exclusive* models(like the ones below), members only models, and commercial licenses to sell your physical prints visit my Patreon in bio http://patreon.com/JustBe3D

Instructions

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Important The photo is of the 5 color version. The 5 color version uses brown and orange under the yellow for more of a gold look. The 4 color version uses just brown under the yellow for more of a dark yellow look.

5 color

Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA Overture White Transmission Distance: 4
PLA Overture Chocolate Transmission Distance: 0.2
PLA Overture Orange Transmission Distance: 7.4
PLA Elegoo Yellow Transmission Distance: 7.2
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to White
At layer #21 (1.76mm) swap to Chocolate
At layer #24 (2mm) swap to Orange
At layer #26 (2.16mm) swap to Yellow
At layer #29 (2.4mm) swap to White for the rest.
 

4 color

Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA Overture White Transmission Distance: 4
PLA Overture Chocolate Brown Transmission Distance: 0.2
PLA Elegoo Yellow Transmission Distance: 7.2
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to White
At layer #21 (1.76mm) swap to Chocolate Brown
At layer #26 (2.16mm) swap to Yellow
At layer #29 (2.4mm) swap to White for the rest.