Search models, users, collections, and posts
BED SUPPORT
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
2.7 h
1 plate
Open in Bambu Studio
Boost
1
2
0
0
0
0
Released
Description
Content has been automatically translated.
I sleep in two beds, but one mattress was higher than the other, so I decided to level them.
The support can be used for something else.
Default Parameters – PLA (0.4 mm nozzle)
Temperatures
- Nozzle temperature: 200 °C
- Bed temperature: 60 °C
- Layer fan: 100% (from layer 2 or 3)
Speeds
- Print speed: 50 mm/s
- Outer wall speed: 30 mm/s
- Infill speed: 60 mm/s
- First layer: 20 mm/s
Layer Height
- Standard height: 0.2 mm
- First layer: 0.2 mm
- Minimum height (fine detail): 0.12 mm
- Fast height (draft): 0.28 mm
Infill
- Standard density: 15–20%
- Recommended pattern: Gyroid or Grid
Retraction (for Bowden type Ender extruder)
- Distance: 5 mm
- Speed: 45 mm/s
(If direct drive extruder: 0.8–1.5 mm retraction)
Walls and tops
- Perimeters (walls): 2–3
- Top layers: 4–6
- Bottom layers: 4–6
Bed adhesion
- Brim: 5 mm (if there are adhesion problems)
- Correct bed leveling (very important)
Flow
- Flow / Extrusion: 100%
- Adjust only if you notice over or underextrusion.
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)