Speaker Riser Stand

// Riser Stand, Mainly For The Edifier MR3 Speakers

// Updates: 

• 18/12/25 - Added TPU pads for top and bottom to dampen vibrations. Actual photos coming soon. (I forgot to take photos. again.. 

  (  . .))

// Notes:

• Printable TPU pads for the top and bottom to dampen vibrations. Bass will still mostly go through, but it helps get rid of the higher buzz from the treble.
• Used an adjusted fuzzy skin to mostly eliminate the seam from showing. Edit to your own discretion.
• Tried to keep the fuzzy skin minimal.
• Can be used for any speakers; simply scale it to what you want or need.
• All models are available as .stl

// Dimensions: (6.25" x 4.875" x (7), (6), or (5)")

• 7" (in.) Tall (177.8 mm), or 6" (in.)  (152.4 mm)
• 4.875" (in.) Wide (123.825 mm)
• 6.25" (in.) Long (158.75 mm)
• TPU pads will add a total of 0.5 in. to the total height.

// Print Settings Used For Base:

• 0.16 Layer Height
• 2 Wall/Perimeters
• 10% Infill (Adapt. Cubic)

// Fuzzy Skin Settings:

• Thickness: 0.2 mm
• Point Distance: 0.4 mm

// If You Have Any Problems, Issues, Or Even Recommendations, Please Comment To Let Me Know